CB12100 12V 10AH VRLA Deep Cycle Battery , ABS Plastic AGM Storage Battery
CB12100 12V 10AH VRLA Deep Cycle Battery , ABS Plastic AGM Storage Battery
Description
Sealed Construction
The unique construction and sealing techniques of the battery guarantee leak
proof operation in any position with no adverse effect to capacity or service life.
Electrolyte Suspension System
All batteries utilize an electrolyte suspension system consisting of a high
porosity, glass fiber material which in conjunction with plates, totally absorb and
contain the electrolyte.
Gas Recombination
CGB batteries incorporate a built-in design that controls gas generation and
induces recombination of more than 99% of gases generated during float or
cyclic usage.
Maintenance Free Operation
Due to the perfectly sealed construction and the recombination of gasses within
the cells, the battery is almost maintenance free.
Low Pressure Valve Regulated System..
All batteries are equipped with safety release valves, designed to operate
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is
never an excessive accumulation of gas within the battery.
Heavy Duty Grids
Heavy duty lead calcium tin alloy grids provide an extra margin of performance
and service life in either float or cyclic applications.
Cyclic Service Life
More than 600 discharge/recharge cycles can be realized from CGB CB and HR
batteries, dependent on the average depth of discharge.
Float Service Life
SE and CB, HR Series batteries have an expected life span of 3 to 5 years in
float service applications.
Self Discharge - Shelf Life
The self discharge rate at room temperature is approximately 3% of rated
capacity per month.
Operating Temperature
CGB Batteries may be operated over a broad range of ambient temperatures.
Deep Discharge Recovery
The batteries recover their capacities even after repeated deep discharges.
Specification
| Nominal Voltage | 12V | Capacity | C20 | 10.0Ah(10.5V, at 25℃) | |
| Nominal Capacity (C20) | 10Ah (10.5V,at 25℃) | C10 | 9.0Ah(10.5V, at 25℃) | ||
| Dimension | Length 151mm | C3 | 7.5Ah(10.5V, at 25℃) | ||
| Width 98mm | C1 | 6.0Ah(10.2V, at 25℃) | |||
| Height 94.5mm | Internal Resistance | Approx. 15 mΩ (25℃) | |||
| Total Height 100mm | Max Short-duration Discharge Current | 300A(25℃) | |||
| Weight | Approx. 3.48kg | Terminal | FO-02/FO-03/ FO-12 | ||
Feature
Designed life for floating charge is 2~3 years (20℃);
Gas Recombination;
Wide temperature scope of application (-15~45℃);
Best temperature of application (20±5℃);
No leaking, safe and reliable;
Standing or lying down for using, convenient to transport and install;
High sealed reaction efficiency, little loss of water, no need to add distilled
water or electrolyte, simple to use and maintain;
Application specific design.
Application
Alarm & Security system
Emergency Power Systerm
Fire-safety Emergency System,
Banks & Financial Centre
Hospital& Testing Laboratories
Telecommunication
Tips and Precaution
Heat kills batteries. Avoid installation and/or operation in close proximity to heat
sources of any kind. While the operating temperature range is -15°C to 45°C,
and ideal service life will be realized when the battery is operated in an ambient
temperature of 20°C (for cyclic service applications, a range of 5°C to 35°C is
recommended).
If the battery is to be installed in an air or water tight container, ventilation must
be provided. Batteries may generate ignitable gases which must not be
contained. Because of this, batteries should not be installed near spark
producing equipment.
Avoid installing the battery in an atmosphere where organic solvents or
adhesives may be present. Do not clean the battery with oils, thinners or similar
substances. Use water only. The case and cover of the battery is ABS plastic
resin which may suffer damage from these chemicals.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.