12V 6 OPzS300 Wind Solar Power Telecom Application Tube ABS Battery

Description:

Designed life for floating charge is 20 years according to IEC60896-11;

Rubber separator with floating electrolyte technology;

High strength ABS material for cover and SAN material transparent container;

Wide temperature scope of application (-15~45℃);

Best temperature of application (20±5℃);

Special filter installation for acid fog proof;

Transparent container, convenient to observe;

Super long service life.

Specifications:

Applications:

Telecommunications

Cable Television

Electric Utility

Alarm & Security system

UPS

Control Equipment

Medical Equipment

Railroad Utility

Photovoltaic System

Alternative Energy System

High Power Backup Supply

Maintenance

The battery should be kept clean and dry. Wring tight the acid-proof bolt, and

cover it.

The installation site should be kept clean and dry. With the best temperature

about 20 C, the battery room should be given ventilation once weekly.

No dust falls in the battery.

Clean the acid-bolt every month with pure water to remove the filth.

Precautions

The battery pack has high voltage, so direct contact or indirect contact through

wet objects with any conducting cable may result in vital injury. The battery pack

is energy-storing equipment, so never short-circuit the battery pack during

operation and maintenance in any way.

Do not wear watch, hand chain, bracelet, ring and other conductive objects

during operation.

Only qualified and professional personnel are allowed to install, operate and

maintain the equipment.

Tips

Heat kills batteries. Avoid installation and/or operation in close proximity to heat

sources of any kind. While the operating temperature range is -15°C to 45°C,

and ideal service life will be realized when the battery is operated in an ambient

temperature of 20°C (for cyclic service applications, a range of 5°C to 35°C is

recommended).

If the battery is to be installed in an air or water tight container, ventilation must

be provided. Batteries may generate ignitable gases which must not be

contained. Because of this, batteries should not be installed near spark

producing equipment.

Avoid installing the battery in an atmosphere where organic solvents or

adhesives may be present. Do not clean the battery with oils, thinners or similar

substances. Use water only. The case and cover of the battery is ABS plastic

resin which may suffer damage from these chemicals.