Power Energy Solar Wind Sealed Lead Acid Battery 12V 120AH CB121200A

Description

Sealed Construction

The unique construction and sealing techniques of the battery guarantee leak

proof operation in any position with no adverse effect to capacity or service life.

Electrolyte Suspension System

All batteries utilize an electrolyte suspension system consisting of a high

porosity, glass fiber material which in conjunction with plates, totally absorb and

contain the electrolyte.

Gas Recombination

CGB batteries incorporate a built-in design that controls gas generation and

induces recombination of more than 99% of gases generated during float or

cyclic usage.

Maintenance Free Operation

There is no need to check specific gravity of the electrolyte or add water to

batteries during float service life. In fact, there is no provision for this type of

maintenance.

Low Pressure Valve Regulated System..

All batteries are equipped with safety release valves, designed to operate

between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is

never an excessive accumulation of gas within the battery.

Heavy Duty Grids

Heavy duty lead calcium tin alloy grids provide an extra margin of performance

and service life in either float or cyclic applications.

Cyclic Service Life

More that 600 discharge/recharge cycles can be realized from CGB CB and HR

batteries, dependent on the average depth of discharge.

Self Discharge - Shelf Life

The self discharge rate at room temperature is approximately 3% of rated

capacity per month.

Operating Temperature

CGB Batteries may be operated over a broad range of ambient temperatures.

Deep Discharge Recovery

The batteries recover their capacities even after repeated deep discharges.

Specifications:

Feature

Designed life for floating charge is 3-5 years (20℃);

Design with flat plate, GEL electrolyte and AGM separator technology;

GEL electrolyte inside of battery keeps uniformity condition, battery is with

excellent cycle life;

GEL electrolyte has huge thermal capacity, thermal runaway phenomena never

occur

High strength ABS material for container & lid;

Wide temperature scope of application(-15~45℃)

Best temperature of application(20±5℃);

No leaking, safe and reliable

Standing or lying down for using, convenient to transport and install

Low self-discharge rate.

Applications

Uninterruptable Power Supply (UPS)

Telecommunication

Emergency lighting

Fire alarm and security systems

Medical appliance

Solar applications

Electronic test equipment

Electronic measuring devices

Geophysical devices

Marine equipment

Precautions:

Always handle batteries with care

Always store upright.

Always charge in a well ventilated place.

Always wear eye protection when handling batteries.

Wear protective clothing if there is any rick of acid splashing.