Energy Sotrage High Rate Discharge Battery , Lead Acid Deep Cycle Battery 12V 135AH

Energy Sotrage High Rate Discharge Battery , Lead Acid Deep Cycle Battery 12V 135AH
 
Description:

Sealed Construction

The unique construction and use waterproof battery cable to offer reliable

guarantee for stable operation of solar street lamp products.

Electrolyte Suspension System

All batteries utilize an electrolyte suspension system consisting of a high

porosity, glass fiber material which in conjunction with plates, totally absorb and

contain the electrolyte.

Gas Recombination

CGB batteries incorporate a built-in design that controls gas generation and

induces recombination of more than 99% of gases generated during float or

cyclic usage.

Maintenance Free Operation

There is no need to check specific gravity of the electrolyte or add water to

batteries during float service life. In fact, there is no provision for this type of

maintenance.

Low Pressure Valve Regulated System..

All batteries are equipped with safety release valves, designed to operate

between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is

never an excessive accumulation of gas within the battery.

Heavy Duty Grids

Heavy duty lead calcium tin alloy grids provide an extra margin of performance

and service life in either float or cyclic applications.

Self Discharge - Shelf Life

The self discharge rate at room temperature is approximately 3% of rated

capacity per month.

Operating Temperature

CGB Batteries may be operated over a broad range of ambient temperatures.

Deep Discharge Recovery

The batteries recover their capacities even after repeated deep discharges.

 
 
Specifications

Feature &  Advantage
 
1.The battery is full of power when it’s out of factory, no need to use liquid
 
charge.
 
2.no memory, no need to discharge battery use, suitable for circuit design.
 
3.by high partition, adsorption and strong.
 
4.there is no flowing liquid (poor liquid), does not leak acid and free Upside
 
down.
 
5.comply with environmental requirements, ease of use.
 
6.the use of lead-calcium alloys, battery self-discharge is very low.
 
7.easy storage, less maintenance.
 
8.using ABS plastic shell and valve technology for safe use.
 
 
Applications:
 
Alarm & Security system
 
 
Emergency Power Systerm
 
 
Fire-safety Emergency System
 
 
Banks & Financial Centre
 
 
Hospital& Testing Laboratories
 
 
Telecommunication
 
 
Storage
 
Batteries should be stored in dry and clean warehouse which has good air
 
exchange system.
 
 
Batteries should avoid direct sunlight. Batteries should not be near to heat
 
(such as radiator, the distance should more than 1m).
 
 
Batteries should avoid any toxic gas and organic solvent.
 
 
Batteries should be recharged within the storage life or before using.