Maintenance Free Valve Regulated Lead Acid Battery 6v 13AH , HR653W Power Supply Battery
Maintenance Free Valve Regulated Lead Acid Battery 6v 13AH , HR653W Power Supply Battery
Description:
Designed life for floating charge is 3~5 years (20℃);
High-rate discharge performance, high energy;
AGM valve regulated sealing technology;
High strength ABS material for container & lid;
Wide temperature scope of application (-15~45℃);
Best temperature of application (20±5℃);
No leaking, safe and reliable;
Standing or lying down for using, convenient to transport and install;
High sealed reaction efficiency, little loss of water, no need to add distilled water
or electrolyte, simple to use and maintain;
Low self-discharge rate.
Specification
| Nominal Voltage | 6V | Nominal Capacity (C20) | 13Ah (5.25V, at 25℃) | ||||
| Nominal Power(15min) | 53W/Cell (5.25V, at 25℃) | Weight | Approx. 2.15kg | ||||
| Dimension | Length 151mm | Terminal | FO-02/FO-03 | ||||
| Width 50mm | Internal Resistance | Approx. 10 mΩ (25℃) | |||||
| Height 95mm | Max Charging Current | 3.9A (25℃) | |||||
| Total Height 101mm | Max Short-duration Discharge Current | 390A(25℃) | |||||
| Charging Voltage | Standby Use | 2.275±0.025V/cell (25℃) | Temperature Compensation | Standby Use | -3.3mV/℃/cell | ||
| Cyclic Use | 2.45±0.05V/cell (25℃) | Cyclic Use | -5mV/℃/cell |
||||
Feature & Advantage
1.The battery is full of power when it’s out of factory, no need to use liquid
charge.
2.no memory, no need to discharge battery use, suitable for circuit design.
3.by high partition, adsorption and strong.
4.there is no flowing liquid (poor liquid), does not leak acid and free Upside
down.
5.comply with environmental requirements, ease of use.
6.the use of lead-calcium alloys, battery self-discharge is very low.
7.easy storage, less maintenance.
8.using ABS plastic shell and valve technology for safe use.
Applications:
Alarm & Security system
Emergency Power Systerm
Fire-safety Emergency System
Banks & Financial Centre
Hospital& Testing Laboratories
Telecommunication
Storage
Batteries should be stored in dry and clean warehouse which has good air
exchange system.
Batteries should avoid direct sunlight. Batteries should not be near to heat
(such as radiator, the distance should more than 1m).
Batteries should avoid any toxic gas and organic solvent.
Batteries should be recharged within the storage life or before using.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.