GEL - AG Seies Solar Wind System ABS Platic Battery GEL122550AG 12V 255AH
 
Description
 
 
Sealed Construction
 
The unique construction and sealing techniques of the battery guarantee leak
 
proof operation in any position with no adverse effect to capacity or service life.
 
 
Electrolyte Suspension System
 
All batteries utilize an electrolyte suspension system consisting of a high
 
porosity, glass fiber material which in conjunction with plates, totally absorb and
 
contain the electrolyte.
 
 
Gas Recombination
 
CGB batteries incorporate a built-in design that controls gas generation and
 
induces recombination of more than 99% of gases generated during float or
 
cyclic usage.
 
 
Maintenance Free Operation
 
Due to the perfectly sealed construction and the recombination of gasses within
 
the cells, the battery is almost maintenance free.
 
 
Low Pressure Valve Regulated System..
 
All batteries are equipped with safety release valves, designed to operate
 
between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is
 
never an excessive accumulation of gas within the battery.
 
 
 
Heavy Duty Grids
 
Heavy duty lead calcium tin alloy grids provide an extra margin of performance
 
and service life in either float or cyclic applications.
 
 
 
Cyclic Service Life
 
More than 600 discharge/recharge cycles can be realized from CGB CB and HR
 
batteries, dependent on the average depth of discharge.
 
 
 
Float Service Life
 
SE and CB, HR Series batteries have an expected life span of 3 to 5 years in
 
float service applications.
 
 
Self Discharge - Shelf Life
 
The self discharge rate at room temperature is approximately 3% of rated
 
capacity per month.
 
 
Operating Temperature
 
CGB Batteries may be operated over a broad range of ambient temperatures.
 
 
Deep Discharge Recovery
 
The batteries recover their capacities even after repeated deep discharges.
 
 
 
 
Specification
 

 
 
 
Feature
 
 
Designed life for floating charge is 5 years (20℃)
 
 
Design with flat plate, GEL electrolyte and AGM separator technology
 
 
GEL electrolyte inside of battery keeps uniformity condition, battery is with
 
excellent cycle life
 
 
GEL electrolyte has huge thermal capacity, thermal runaway phenomena never
 
occur
 
 
High strength ABS material for container & lid
 
 
Wide temperature scope of application(-15~45℃)
 
 
Best temperature of application(20±5℃)
 
 
No leaking, safe and reliable
 
 
Standing or lying down for using, convenient to transport and install
 
 
Low self-discharge rate.

 
 
Application

Solar system and Wind system
 

Emergency lighting equipment

Fire alarm and security systems
 

Telecommunication equipment
 

Electric equipment and telemeter equipment
 

Light equipment

Wireless lawn movers vacuum cleaner and washing machine
 

Toys and consumer electronics
 

Portable power tools measuring and medical equipment Portable video

camera portable personal computer
 

Garden lighting
 
 

 
 
 
Tips and Precaution
 
 
Heat kills batteries. Avoid installation and/or operation in close proximity to heat
 
sources of any kind. While the operating temperature range is -15°C to 45°C,
 
and ideal service life will be realized when the battery is operated in an ambient
 
temperature of 20°C (for cyclic service applications, a range of 5°C to 35°C is
 
recommended).
 
 
If the battery is to be installed in an air or water tight container, ventilation must
 
be provided. Batteries may generate ignitable gases which must not be
 
contained. Because of this, batteries should not be installed near spark
 
producing equipment.
 
 
Avoid installing the battery in an atmosphere where organic solvents or
 
adhesives may be present. Do not clean the battery with oils, thinners or similar
 
substances. Use water only. The case and cover of the battery is ABS plastic
 
resin which may suffer damage from these chemicals.