12V 150AH Rechargeable Valve Regulated Lead Acid Battery VRLA For Solar , Flame Retartant Plastic
 
Description:
 
1. battery for solar Sealed/Maintenance–Free
The valve regulated spill proof construction allows trouble-free safe operation in
 
any position. There is no need to add electrolyte, as gases generated during
 
the charge phase are recombined in a unique “oxygen cycle”.
 
2. Long Shelf Life
A low self-discharge rate, up to approximately 3% per month, may allow storage
 
of fully charged batteries for up to a year, depending on storage temperatures,
 
before charging becomes critical.
 
3. Deep Discharge Recovery
Special separators, advanced plate composition and a carefully balanced
 
electrolyte system ensure that the battery has the ability to recover from
 
excessively deep discharge.
 
4.Low Pressure Valve Regulators
All batteries feature a series of low pressure one-way relief valves. These
 
valves safely release any excessive accumulation of gas inside the battery and
 
then reseal.
 
5.High Discharge Rate
Low internal resistance allows discharge currents of up to ten times the rated
 
capacity of the battery. Relatively small batteries may thus be specified in
 
applications requiring high peak currents.
 
 
Specifications
 
 

 
 
 
 
 
Feature & Advantage
 
We have more than 23 years battery manufacturer management experiences.
 
Widest operating temperature range
 
 
Superior performance at lower temperatures (twice the performance at
 
temperatures below -20ºC)
 
 
A unique corrosion-resistant grid alloy ensures CGB batteries have long service
 
life
 
 
Recovery capabilities even after deep discharges
 
 
We passed ISO9001, ISO14001, OHSAS18001, CE, UL, VDS Certificates.
 
 
Can be mounted and operated in any position (except inverted) due to the
 
products’ design providing an attractive feature for less accessible areas
 
 
Applications
 
1.Telephone switchboard, electric equipments, medical equipments,
 
instruments, and meters
 
2.Computer, uninterrupted power source (UPS), Inverter
 
3. Power transmission and transformer station, switch control, and accident
 
Llighting
 
4.Fire fighting, safety device, and alarm monitoring
 
5. Aviation, spaceflight, and power storage
 
6.Automatic office system
 
7. Radio communication system
 
8. Emergency lighting and car/ship starting system
 
9.Portable electric appliances and mining system
 
10. Traffic and navigation signal lamp
 
11.Solar/Wind/Hybrid power systems
 
 
Caution
1. The valve regulated sealed lead acid battery is maintenance free and without
 
acid adding, any top cover opening is forbidden during use.
 
2.Battery should be charged once every 6 months after leaving the factory.
 
3.Checking the battery appearance before using, and avoid strong vibration or
 
mechanical damage.
 
4.Recommend recycling using temperature 25℃ ± 5% , the battery is strictly
 
prohibited get wet in the rain and soaking.
 
5.Battery installation and removal should be uniform stress, stress at the shell
 
should be part of the battery, avoid damage the terminal.
 
6.If you need batteries in parallel, do not exceed three parallel.
 
7. When used in multiple circuits, it must be according to battery marks "+", "-" in
 
order of priority and space cannot be less than 15mm.
 
8.Before you connecting with device, make it disconnected, then connect battery
 
positive to the devices positive, negative connected to negative terminal, and fix
 
the cable.