2.9AH Emergency Sealed Lead Acid 12v Battery Rechargeable Flame Retardant

Description

Sealed Construction

The unique construction and use waterproof battery cable to offer reliable

guarantee for stable operation of solar street lamp products.

Electrolyte Suspension System

All batteries utilize an electrolyte suspension system consisting of a high

porosity, glass fiber material which in conjunction with plates, totally absorb and

contain the electrolyte.

Gas Recombination

CGB batteries incorporate a built-in design that controls gas generation and

induces recombination of more than 99% of gases generated during float or

cyclic usage.

Maintenance Free Operation

There is no need to check specific gravity of the electrolyte or add water to

batteries during float service life. In fact, there is no provision for this type of

maintenance.

Low Pressure Valve Regulated System..

All batteries are equipped with safety release valves, designed to operate

between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is

never an excessive accumulation of gas within the battery.

Heavy Duty Grids

Heavy duty lead calcium tin alloy grids provide an extra margin of performance

and service life in either float or cyclic applications.

Self Discharge - Shelf Life

The self discharge rate at room temperature is approximately 3% of rated

capacity per month.

Operating Temperature

CGB Batteries may be operated over a broad range of ambient temperatures.

Deep Discharge Recovery

The batteries recover their capacities even after repeated deep discharges.

Specifications

Features

Designed life for floating charge is 3~5 years (20℃)

AGM valve regulated sealing technology

High strength ABS material for container & lid

Wide temperature scope of application (-15~45℃)

Best temperature of application (20±5℃)

No leaking, safe and reliable

Standing or lying down for using, convenient to transport and install

High sealed reaction efficiency, little loss of water, no need to add distilled

water or electrolyte, simple to use and maintain

Low self-discharge rate

Environmental Services:

Ensure that our operations and products meet or exceed government

requirements.

Monitor, control and eliminate, where possible, all environmental emissions,

discharges and waste generated by our operations.

Develop products that will have a minimum effect on our environment.

Applications:

Alarm & Security system

Emergency Power Systerm

Fire-safety Emergency System

Banks & Financial Centre

Hospital& Testing Laboratories

Telecommunication

Notice:

Don’t charge in the sealed container.

Please use cotton cloth to clean, if the battery is broken down and leak

electrolyte. Please wash your skin when touch the electrolyte.

You should be careful and regular check when use the battery. To avoid the

battery don’t work. You should change the battery if the capacity is not full or has

been damage, especially after one year using.

Don’t put the battery in the fire, or it will explode.