Product Description
This red flat SATA 7Pin data cable connector is designed for reliable internal signal transmission between hard drives, solid-state drives and host controllers. The low-profile 90-degree right-angle SATA plug with metal latch provides a secure connection to the device while easing routing in narrow bays and along chassis walls. The opposite straight plug interfaces directly with motherboard, HBA card or backplane terminals, making it suitable for a wide range of electronic storage systems.
Flat 24–26AWG copper wire cable construction with shielded differential pairs helps maintain controlled impedance and reduces crosstalk, ensuring stable 1.5 / 3 / 6 Gb/s SATA performance in desktop PCs, workstations and server environments. The robust molded housings and strain-relief design improve mechanical reliability under vibration and frequent plugging operations. OEM/ODM customization is available for cable length, connector orientation, color and integration with power harnesses or PCB headers.
![]()
![]()
![]()
| Product Type |
SATA 7Pin high-speed data cable connector assembly |
| Interface Standard |
Serial ATA, compatible with SATA I / II / III |
| Connector A |
7Pin SATA male, 90-degree right-angle with metal latch |
| Connector B |
7Pin SATA male, straight plug (hidden end) |
| Pin Count |
7 electronic signal pins per connector |
| Typical Pitch |
1.27 mm differential signal pitch |
| Cable Style |
Red flat SATA ribbon cable |
| Wire Gauge |
24–26AWG stranded copper conductors |
| Conductor Material |
Oxygen-free copper for low-loss transmission |
| Shielding |
Foil shielded differential pairs with drain wire |
| Outer Jacket |
PVC electrical insulation, abrasion and flex resistant |
| Max Data Rate |
Up to 6 Gb/s SATA III |
| Characteristic Impedance |
100 Ω differential (typical) |
| Contact Material |
Copper alloy terminals with gold over nickel plating |
| Housing Material |
UL94V-0 PBT / PA, high-temperature resistant |
| Operating Temperature |
-20 °C to +80 °C |
| Cable Length |
0.3–0.6 m standard; customization available |
| Compliance |
RoHS / REACH |
| Custom Options |
Length, color, connector combination, labeling, bundled harness with power connector or PCB header |
Applications
Internal SATA connection between motherboard or RAID controller and 2.5"/3.5" HDD / SSD
Space-constrained cabling in 1U / 2U rack-mount servers, NAS and JBOD enclosures
DVR / NVR and industrial data-logging equipment using Serial ATA interfaces
Embedded systems and compact PCs where a right-angle SATA connector reduces stress on drive sockets
Custom test fixtures and electronic modules requiring high-speed SATA signal links with flat, easy-to-route cables
Precautions
Ensure both mating receptacles are standard SATA 7Pin interfaces; do not force the connector if alignment is incorrect to avoid bending pins.
Maintain an adequate bending radius, especially near the right-angle end, to preserve impedance and high-speed performance.
Route the cable away from sharp metal edges and high-current power conductors to minimize insulation wear and electromagnetic interference.
Use cable ties or clips in high-vibration applications so that mechanical load is not transferred directly to the SATA terminals or PCB sockets.
Variants with dual right-angle plugs, multiple parallel cables, or rugged jackets for industrial and automotive environments can be supplied for project and batch orders.
![]()
![]()
![]()
![]()
![]()
![]()
