RT/Duroid 5880 20mil 0.508mm Rogers High Frequency PCB for Radar Systems

(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)

Rogers RT/duroid 5880 high frequency material is glass microfiber reinforced PTFE composites which is designed for exacting stripline and microstrip circuit applications. The exceptional dielectric constant uniformity results from its randomly oriented microfibers. The dielectric constant of RT/duroid 5880 is uniform from panel to panel and is constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT/duroid 5880 to Ku-band and above. RT/duroid 5880 materials are easily cut, sheared and machined to shape. They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes.

The typical applications are commercial airline broadband antennas, microstrip circuits, stripline circuits, millimeter wave applications, military radar systems, missile guidance systems and point to point digital radio antennas etc.

General description

This is a type of double sided RF PCB built on RT/duroid 5880 for the application of Radar Systems.

Basic specifications

Base material: RT/duroid 5880 20mil (0.508mm)

Dielectric constant: 2.20+/-0.02

Layer count: 2 layers

Type: Through holes

Format: 128mm x 62mm = 1 type = 1 piece

Surface finish: Immersion gold

Copper weight: Outer layer 35 μm

Solder mask | Legend: No | No

Final PCB height: 0.52 mm

Standard: IPC 6012 Class 2

Packing: 20 panels are packed for shipment.

Lead time: 7 working days

Shelf life: 6 months

Applications

Commercial Airline Broadband Antennas, Microstrip and Stripline Circuits, Millimeter Wave Applications, Military Radar Systems, Missile Guidance Systems, Point to Point Digital Radio Antennas.

Data sheet of Rogers RT/duroid 5880