30 Ton Universal Material Testing Machine Constant Stress Testing Machine 300KN

30 Ton Universal Testing Machine Description :

constant stress pressure testing machine 300KN is developed by my company's latest applicable to scientific research institutes, industrial and mining enterprises such as the use of a new generation of testing instruments, has advantages of simple structure, low noise and high precision, to avoid the leakage of hydraulic system, the noise big shortcoming. The high precision load sensor is used directly to achieve higher precision. The Constant Stress Testing Machin is compact, easy to maintain, beautiful appearance, high precision and function. It is the ideal test instrument for research institute and cement and glue sand production unit.

30 Ton Universal Testing Machine Specification :

Host configuration :

1. Lenovo computer   1 set

2. HP ink jet printer    1 set

3. Control software    1 set

4. 300kN high-precision load sensor  1 piece

5. Ac servo motor       1 set

6. set of deceleration system

7. Anti-folding test fixture  1 set

Constant Stress Testing Machine 300KN Features:

The pt-ya300c microcomputer control constant stress cement pressure testing machine is a precision testing machine developed on the basis of basic performance. Excellent operating performance:

A) adopt the advanced ac servo motor speed drive system, and the speed adjustment ratio is 1:700, which can realize the increasing speed of any pressure plate in the range of 0.05 to 100mm/min according to the loading speed.

B) the whole mechanical structure, from the servo motor to the servo speed reducer, adopts the full seal structure, without the need to replace the lubricating oil during the operation, no pressure oil leakage and proportional valve plugging;

C) the main machine is designed according to man-machine engineering standard, which makes the operation simple and convenient and convenient. Measurement control is high precision and intelligent;

D) give full play to the advantages of microcomputer, reduce the hardware of the electronic control system, and all the parts of the electric equipment parts become two modules, which greatly improve the reliability of products;

E) exceeding the maximum limit of the test force (2-5% of the gear that is overloaded), or when the piston meets the limit, immediately stop;

F) all measurements can be kept permanently for later observation;

The test force and displacement measurement control are concentrated in the experimental interface of microcomputer, which is intuitive and easy to operate.