Haynes 282 High Temperature Nickel Alloys , Sheet Fabrications Nickel Based Alloys
Haynes 282 Nickel Alloy for High Temperature Structural Applications
HAYNES 282 is a wrought, gamma-prime strengthened superalloy developed for high temperature structural applications, especially those in aero and land-based gas turbine engines. It possesses a unique combination of creep strength, thermal stability, weldability, and fabricability. The alloy has excellent creep strength in the temperature range of 1200 to 1700°F (649 to 927°C), surpassing that of Waspaloy alloy, and approaching that of R-41 alloy.
Easily Fabricated
This high level of creep strength in HAYNES 282 alloy has been attained at a relatively low volume fraction of the strengthening gamma-prime phase, resulting in outstanding resistance to strain-age cracking (normally a problem with superalloys in this creep strength range). Additionally, slow gamma-prime precipitation kinetics allow for the alloy to have excellent ductility in the as-annealed condition. Consequently, HAYNES 282 exhibits superior weldability and fabricability.
Heat Treatment
HAYNES 282 alloy is provided in the solution-annealed condition, in which it is readily formable.
The typical solution-annealing temperature is in the range of 2050 to 2100°F (1121 to 1149°C). After component fabrication, a two-step age hardening treatment is required to put the alloy into the
high-strength condition. The treatment includes 1850°F (1010°C) / 2 hours / AC (air cool) + 1450°F
(788°C) / 8 hours / AC.
Chemical composition
| Element | C | Mn | Si | P | S | Cr | Co | Mo | Ti |
| Weight(%) | 0.04~0.08 | 0.3 max | 0.15 max | 0.015 max | 0.015 max | 18.5~20.5 | 9.0~11.0 | 8.0~9.0 | 1.9~2.3 |
| Element | Al | Zr | B | Fe | Cu | Ni | Ta | Nb | W |
| Weight(%) | 1.38~1.65 | 0.02 max | 0.003~0.010 | 1.5 max | 0.1 max | Rem | 0.1 max | 0.2 max | 0.5 max |
Applications
The features of HAYNES 282 alloy make it suitable for critical gas turbine applications, such as
sheet fabrications, seamless and flash butt-welded rings, and cases found in compressor, combustor, and turbine sections. In augmented aircraft gas turbines, the new alloy will be useful for
exhaust and nozzle components. In industrial gas turbines, HAYNES 282 alloy is a good candidate for transition sections and other hot-gas-path components.
Forms of supply
Round bar
Forging
Sheet
Strip
Pipe
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.