Wear resistant hardfacing gas shielding flux cored welding wire
According to customer needs, we specialized in research and production of various gas-wire., To replace imported wire, our products can be used for surfacing of all types of wear and impact, welding efficiency is 3-5 times than surfacing electrode.
| Item name | Model | Specification | Hardness | Main Ingredient | Main application and characteristics |
| Gas Shielded Welding Wires | WD-D114 | 1.6 | 50-55 |
C:0.45-1 Cr:2-3 Mn:14-18 |
High manganese steel welding electrode, the surface has the characteristics of the strain hardening after violent shocks, suitable for welding such as impact hammer, hammer plate parts. |
| WD-D115 | 1.6 | 50-55 |
C:0.45-1 Cr:2-3 Mn:14-18 |
High manganese steel welding electrode, the surface has the characteristics of the strain hardening after violent shocks, suitable for welding such as impact hammer, hammer plate parts. | |
| WD-D172 | 1.2,1.6 | ≥40 |
C:0.4-0.5 Cr:1.5-2.5 Mo:1.5-2.5 |
Used for surfacing welding gear, mining machinery, such as wear and tear parts. | |
| WD-D165 | 1.6 | 60-65 |
C≤1.0 Cr:9-15 |
High hardness, wear resistance wire, suitable for abrasive wear parts of the overlaying welding repairing. | |
| WD-D212 | 1.2,1.6 | ≥50 |
C:0.4-0.7 Cr:4.0-5.5 Mo:0.8-1.5 |
For surfacing welding, the surfaces of all wear parts, such as gears, bucket, mining machinery, etc. | |
| WD-D213-G | 1.6 | 45-55 |
C:0.3-0.6 Cr:1.5-2.5 Mo:1.0-2.0 |
For surfacing welding the wear of the surface of the part. | |
| WD-D256 | 1.6 | HB≥170 | C:0.5-1.1 Mn:10-17 | Suitable to all kinds crusher, high manganese steel rail, bulldozers and other easy wear welding parts. | |
| WD-D258 | 1.6 | 55-60 |
C:0.3-0.6 Cr:4.5-6.5 Mo:1.0-1.8 |
||
| WD-D265 | 1.6 | 60-65 |
C:≤1 Cr:9-15 Mo:0.5-1 W:0.5-1.5 V:0.5-1.5 Ni:0.5-1.5 |
Used for surfacing wear parts | |
| WD-D313 | 1.6 | 45-50 | C:0.2-0.3 Cr:11-14 | Used for continuous casting roller surfacing | |
| WD-D322 | 1.6 | 55-63 |
C:0.3-0.5 W:7-10 Mo:0.5-2.5 |
Suitable for repairing a die and tough, and require a higher wear properties of mechanical parts. | |
| WD-D405 | 1.6 | 53-60 |
C:0.25-0.55 Cr:5.5-7.5 Mo:0.8-1.5 W:1.0-2.0 V:0.5-1.0 |
Suitable for hot-rolled billet roller surfacing | |
| WD-D430 | 1.6 | 35-40 | C:0.1-0.25 Cr:16-18 | Corrosion-resistant components for general welding surface | |
| WD-D502Mo | 1.6 | 35-45 |
C:0.1-0.25 Cr:11-16 Mo:0.5-2.5 |
Suitable for valve surfacing | |
| WD-D507MoA | 1.2,1.6 | 35-45 |
C≤2.0 Cr:10-15 Mo:0.5-1.5 |
Suitable for valve surfacing | |
| WD-D518(A) | 1.6 | 40-50 |
C:0.08 Cr:13.1 Mo:1.15 Ni:3 |
Used for continuous casting roller surfacing | |
| WD-D688 | 1.2,1.6 | 50-58 | C:2.5-5.0 Cr:22.5-27.5 | Apply to a serious part of abrasive wear surfacing, multi-layer welding. Surfacing layer thickness can be up to50 mm | |
| WD-D788 | 1.2,1.6 | 50-60 | C:3.0-4.5 Cr:24-30 | Apply to a serious part of abrasive wear surfacing welding, welding layer thickness control under20 mm | |
| WD-D788A | 1.2,1.6 | 65-72 | C:3.0-4.5 Cr:20-25 | Apply to a serious part of abrasive wear surfacing, limited to single layer welding | |
| WD-D888 | 1.2,1.6 | 58-65 | C:3.5-4.5 Cr:24-27.5 | Apply to a serious part of abrasive wear surfacing welding, welding layer thickness control under10 mm | |
| WD-D990 | 1.6 | 58-65 |
C:3.0-5.0 Cr:24-28 Mo:1.0-1.5 Nb:0.5-1.5 W:0.5-1.5 V:0.5-1.0 |
Wear parts for high temperature welding | |
| WD-D995 | 1.6 | 58-65 |
C:3.0-5.0 Cr:24-28 Mo:1.0-1.5 Nb:0.5-1.5 W:0.5-1.5 V:0.5-1.0 |
Wear parts for high temperature welding | |
| WD-DG7 | 1.6 | 52-60 | C:1-3.5 Cr:6-10.5 | Suitable for welding shield machine parts |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.