IEC60695-2-10 Flammability Testing Needle Flame Test Apparatus
IEC60695-2-10 Flammability Testing Needle Flame Test Apparatus
1. Introduction
The needle flame test apparatus is designed according to the requirements of IEC 60695-11-5, GB/T5169.5, Section 13.3.1 of IEC60598-1, Appendix G.2.1 and Section S.1 of IEC62368-1, and Section 30.2.4 of IEC60335-1. It is widely used in material testing of electrical and electronic products and equipment components and parts such as lamps, household appliances, IT/AV equipment, and electrical accessories, and is also suitable for the evaluation of solid insulating materials or other combustible materials. The equipment is used to simulate the effect of a small flame caused by a faulty adjustment, and uses simulation technology to assess the fire hazard. The equipment is equipped with a 7-inch color touch screen, PLC, drive motor, flame calibration system, ignition gun, pine board, trickle paper, and a four-button remote control.
2. Standard
- IEC60695-11-5 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - apparatus, confirmatory test arrangement and guidance
- IEC60598-1 Luminaires - Part 1: General requirements and tests clause 13.3.1
- IEC60238-1 Audio/video, information and communication technology equipment - Part 1: Safety requirements Annex G.2.1, clause S.1
- IEC60335-1 Household and similar electrical appliance - Safety - Part 1: General requirements clause 30.2.4
3. Parameters
| Power supply | AC 220V/50Hz |
| Control system | 7-inch color touch Screen + PLC |
| Burner |
Inner diameter: Φ 0.5mm ± 0.1mm Outer diameter: ≤Φ 0.9mm Length: ≥35mm, Material: stainless steel |
| Chamber volume | ≥ 0.5m3 , matte black background, illuminance ≤ 20Lux, built in exhaust fan, exhaust hole: Φ100mm |
| Temperature sensor | Copper with Φ4±0.01mm and 0.58±0.1g weight, |
| Thermocouple |
Omega, Diameter: Φ0.5mm K type, Material: K type |
| Burner angle | 450 or 900, auto switch |
| Ignition way | Manual |
| Gas | 95% butane gas or propane gas (prepare by user) |
| Flame height | 12mm ± 1mm (adjustable), stainless steel |
| Timer |
Integrated in PLC Accuracy: ±0.1s |
| Ignition layer | White pine board with thickness 10mm, and cover with wrapping tissue 12g/m2 ~30g/m2 |
| Drive Mode | Auto, with 4-button remote control |
| Dimension | 1100mm*630mm*1300mm |
4. Figures
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.