Dimension Verification Tool Plug Socket Tester for AS/NZS 3112 Figure A1 Three-Pin Flat-Pin Plugs
Gauges for Three-Pin Flat-Pin Plugs for Dimension Verification as Per AS/NZS 3112 figure A1
1. Introduction
The gauges for three-pin flat pin plugs are designed according to AS/NZS 3112 figure A1 and clauses 2.8.1 & 2.8.4 &2.13.7.1 & 2.13.7, for routine inspection of three-pin flat-pin plugs and two-pin flat-pin plugs, and dimension inspection of the pins before performing bending test and after free-fall test.
The disposition of pins in flat-pin plugs of types shown in figure 2.1 (a) and figure 2.1(c) shall be checked with this gauge, the plug pins shall pass easily through the gauge at all depths of insertion.
2. Specification
|
Material of gauge |
Hardened steel |
|
Quantity |
3 (Gauge for three pin flat pin plugs 250Vmax./10A *1, Gauge for three pin flat pin plugs 250Vmax./15A*1, Gauge for three pin flat pin plugs 250Vmax./20A*1) |
|
Dimension |
As per AS/NZS 3112 figure A1 |
AS/NZS 3112 figure A1
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.