2KVA Power Capacity Voltage Stabilizer with 180-300V Input Voltage and ±3% Stability

Price Negotiable

Price: USD500~USD30000

MOQ: 1 set

Delivery Time: 5-10 working days

Brand: Pego Electronics

Product Description

Voltage stabilizer

1. Introduction

A voltage stabilizer is a device that maintains a stable output voltage. It mainly consists of a voltage regulation circuit, a control circuit, a servo motor, and other components.When the input voltage or load fluctuates, the control circuit samples, compares, and amplifies the voltage signal, then drives the servo motor to adjust the position of the regulator’s carbon brush.By automatically adjusting the coil turns ratio, it keeps the output voltage stable.

2. Specification

Model	TND3-2KVA
Power capacity	2KVA
Input voltage	180-300V
Output voltage	220V
Stability	±3%
Rated current	9A
Frequency	50Hz/60Hz
Applicable load	Any load
Waveform distortion	No additional waveform distortion
Dimension and weight	W275mmD240mmH205mm/7.5kg
Response speed	≤ 1.5 s (when the input voltage variation not exceeds 10%)
Electric strength	1500V power-frequency sinusoidal voltage for 1 minute, no breakdown or flashover.
Protective grade	IP20
Cooling method	Natural cooling&Forced air cooling
Protection function	Over-voltage protection: When the output voltage exceeds 10% of the rated voltage, the output will be cut off after a delay of 3–5s. Short-circuit protection: Automatically cuts off the input power when a short circuit occurs on the load. Over-current protection: 5 times rated current, operation time approximately 1s.
Required working condition	Installation: Indoor Altitude: Not exceeding 1500 m above sea level Temperature: -15℃~40℃ Humidity: <50% R.H. @40℃R.T.