Test Probe 11 Unjointed Test Finer Probe with 50N Thruster Conforms to IEC61032
Test Probe 11 Unjointed Test Finer Probe with 50N Thruster Conforms to IEC61032
1. Introduction of Test Probe 11:
The test probe 11 is designed according to IEC61032 figure 7 and UL clauses. This probe may be used to verify the protection of persons against access to hazardous parts, and to verify the mechanical strength of openings in the enclosure or internal barriers.
2. Specification of Unjointed Test Finger Probe:
| diameter of test finger | 12mm |
| Length of test finger | 80mm |
| Diameter of baffle | 50mm |
| Thickness of baffle: | 5mm |
| Strength range | 10N, 20N, 30N,40N,50N |
| Material | insulating material, metal |
3. Picture of Test Probe 11:
4. Probe List:
| Probes and application | Probe code | Short description | Force to be applied |
| Access probes of IEC60529 (IP code) | Probe A | Sphere:Φ50 with handle | 50 |
| Probe B | Jointed test finger | 10 | |
| Probe C | Rod: Φ2.5-length 100 | 3 | |
| Probe D | Wire: Φ1.0-length 100 | 1 | |
| Object probes of IEC60529 (IP code) | Probe 1 | Sphere: Φ50 | 50 |
| Probe 2 | Sphere: Φ12.5 | 30 | |
|
Other access probes Persons against access to hazardous live parts or hazardous mechanical parts |
Probe 11 | Unjointed test finger | 50 |
| Probe 12 | Cylindrical pin: Φ4-length 50 | ||
| Probe 13 | Conincal pin: Φ3 to 4-length 15 | ||
| Probe 14 | Bar: 3*1 | 20 | |
| Probe 15 | Deleted | ||
| Probe 16 | Deleted | ||
| Probe 17 | Wire: Φ0.5 | ||
| Probe 18 | Small finger probe: Φ8.6-length 57.9 | 10 | |
| Probe 19 | Small finger probe: Φ5.6-length 44 | 10 | |
|
Other access probes Persons against access to hazardous mechanical parts |
Probe 31 | Cone: Φ110/60 | 50 |
| Probe 32 | Rod: Φ 25 | 30 | |
| Probe 33 | Delected | ||
|
Other access probes Persons against access to hot or glowing parts |
Probe 41 | Probe: Φ 30 | |
| Probe 42 | Deleted | ||
| Probe 43 | Bar: 50*5 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.