Accessability Test Finger Probe Cylindrical Pin Φ4-Length 50 With Handle
Test Probe 12 Cylindrical Pin Conforms to IEC61032 Accessability Test Finger Probe
Introduction:
It is designed according to IEC61032 figure 8. This pin is intended to be used on appliances for verifying the inaccessibility of hazardous live parts or hazardous mechanical parts which are liable to be touched accidentally by a tool, for example a screwdriver or similar pointed object in normal use.
Specification:
| diameter of test probe | 4mm |
| length of test probe | 25mm |
| diameter of baffle | 25mm |
| thickness of baffle | 4mm |
| Material | Insulating material (handle), metal (test probe) |
Picture:
Probe List:
| Probes and application | Probe code | Short description | Force to be applied |
| Access probes of IEC60529 (IP code) | Probe A | Sphere:Φ50 with handle | 50 |
| Probe B | Jointed test finger | 10 | |
| Probe C | Rod: Φ2.5-length 100 | 3 | |
| Probe D | Wire: Φ1.0-length 100 | 1 | |
| Object probes of IEC60529 (IP code) | Probe 1 | Sphere: Φ50 | 50 |
| Probe 2 | Sphere: Φ12.5 | 30 | |
|
Other access probes Persons against access to hazardous live parts or hazardous mechanical parts |
Probe 11 | Unjointed test finger | 50 |
| Probe 12 | Cylindrical pin: Φ4-length 50 | ||
| Probe 13 | Conincal pin: Φ3 to 4-length 15 | ||
| Probe 14 | Bar: 3*1 | 20 | |
| Probe 15 | Deleted | ||
| Probe 16 | Deleted | ||
| Probe 17 | Wire: Φ0.5 | ||
| Probe 18 | Small finger probe: Φ8.6-length 57.9 | 10 | |
| Probe 19 | Small finger probe: Φ5.6-length 44 | 10 | |
|
Other access probes Persons against access to hazardous mechanical parts |
Probe 31 | Cone: Φ110/60 | 50 |
| Probe 32 | Rod: Φ 25 | 30 | |
| Probe 33 | Delected | ||
|
Other access probes Persons against access to hot or glowing parts |
Probe 41 | Probe: Φ 30 | |
| Probe 42 | Deleted | ||
| Probe 43 | Bar: 50*5 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.