Q235 PG CSV Induction Cooker Vessels Carbon Steel Vessels GB21456 Annex A

PG - CSV Electrical Test Instruments Low Carbon Steel Vessels Meet the Requirements of GB21456 Annex A

1. Standard:

GB21456-2014 Annex A

2. Introduction

The standard pan is designed according to annex A, GB21456-2014, it is applied to evaluate the energy efficiency and energy efficiency grades. The pan and the lid are made of Q235 having a maximum carbon content of 0.08%, and the thickness of the lid (t) is 1mm, the bottom of the pan can not convex outward, and the maximum concavity at the bottom is 0.6% times the effective diameter. The surface of the pan and the lid should be smooth and polished to prevent rust.

3. Features:

1) The vessels are made of Q235, having a maximum carbon content of 0.08%

2) Vessels' body and the cover surface should be smoothly, and sand rust surface treatment.

3) Thickness of the cover is 1mm, body thickness “t” of the vessel please check the figures

4) The base of the vessel shall not be convex. The concavity of be base of the vessel shall not exceed 0.006d.

4. Parameter

. Picture:

About Pego:

Pego Tester (Jiangxi) is founded by PEGO GROUP in 2011, a professional high-tech enterprise engaged in developing, marketing and service for electronic test equipment. At the moment, the company has seven groups main products: Go” and “Not Go” gauges, UL and IEC test probes, electric safety test equipment, environment test equipment, EMC and EMI test equipment, LED test equipment and mechanical equipment, the business scope includes E14, E27, E40 go and not go gauges, IP code probes, UL probes, flame test chambers, glow-wire test apparatus, tracking index apparatus, ground resistance tester, insulating resistance tester, hipot tester, temperature chamber, waterproof test equipment, dust chamber, spring hammer, pendulum hammer, ESD gun, surge generator, goniophotometer, integrating sphere, spectroradiometer, power supply and etc.