IEC60529 IPX12 Rain Test Chamber with PLC Touch Screen and 0.4mm Nozzle

1. Standard of IPX12 Rain Test Chamber:

IEC60529 clause 14.2.1 and 14.2.2

2. Application of IPX12 Rain Test Chamber

outdoor lighting, auto parts, watch and etc.

3. Introduction of IPX12 Rain Test Chamber:

IPX12 Rain test chamber is designed according to IEC60529 clause 14.2.1 and 14.2.2. The IPX12 rain test chamber is applied to simulate the conditions of vertically dripping and dripping with 15 degrees tilted, and then to check if the products ( electronics, luminaire, electric components, auto parts and etc.) can meet the requirements.

4. Features of IPX12 Rain Test Chamber:

1) Used for For IPX1 and IPX2 testing

2) Adopts box-type structure and buit-in water tank, the water can be recycled.

3) The shell and turntable are made by SUS304 stainless steel, to ensure the rustless for long time use.

4) Equip with flowmeter, can accurately manual adjust the flowmeter.

5)The cone-sharp nozzles are made by brass, and easy to change. The stainless steel protective cover under the nozzles can protect user from any hurts.

6) Equip with high accuracy filter, the filter element can change regularly.

7) The drip board can lift, and will auto stop at the position of 200mm upper of the test specimen.

8) Control system: 7 inch touch screen+ Panosonic PLC.

5. Specification of IPX12 Rain Test Chamber:

6. Picture of Nozzle:

7. Package of IPX12 Rain Test Chamber:

What are the commonly used waterproof test machine?

For most enterprises, especially the enterprises relatives to electronics, IP grade test is a must to adapt to the customers demands. But how to choose a suitable equipment? According to our experience, we recommend the following equipment:

1. IPX1 and IPX2 vertical drip test equipment: applied to simulate the rain and 15⁰ rain conditions. Application scope: mobile phone, tablet PC, camera, voice box, outdoor cabinet and etc. Generally, the producer would be customized the drip board according to sample size. There are three types of drip box, box type, wall-hung type and frame type.

2. IPX3 and IPX4 oscillating tube: Applied to test the protection performance against the raining condition at the angle of 60⁰ and 180⁰. Application scope: water heater, washing machine, auto parts, computer, transformer, LED luminaire and etc. The oscillating tube has 8 sizes includes 200mm, 400mm, 600mm, 800mm, 1000mm, 1200mm, 1400mm and 1600mm. There are two types, box type and double-pillar type.

3. IPX5 and IPX6 Jet nozzles: Applied to test the protection performance against the spray water or high pressure spray water. Application scope: outdoor lighting fixture, military productsand etc. There are 2 types includes box type and split type.

4. IPX7 Temporary immersion tank: Applied to test the equipment under the condition of immersion tank to simulate the equipment under the water of more than 1.2m depth. Application scope: underwater camera, intelligent electronic equipment, underwater monitor and etc. There are 2 types according to the material, includes stainless steel type and stalinite type.

5. IPX8 continue immersion tank: harsher than IPX7. Mainly applied to the products work under the 1.2m or deeper water. Application scope: diving lamp, diving watch, diving headset, diving camera, diving monitor and etc. As the pressure is big, the tank adopts special pressure bearing device. Customized accept: 10m, 30m, 50m, 60m, 80m, 100m and etc.