Vertical Hammer Impact Test Equipment AC220V Power IEC60068-2-75 IK01 To IK10
IEC60068-2-75 IK01 to IK10 Pendulum and Vertical Hammer Impact Test Equipment
1. Introduction
The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Eha and Test Ehc, and can meet the requirement of IEC62262, IEC60598, EN50102, GB2423.55-2006, GB20138-2006 and etc. It is apply to sheet metal, household appliance, luminaire and etc. for mechanical impact testing. The device can be adjusted back and forward, left and right, and the angle also can be adjusted. The IK mechanical impact test apparatus can simultaneously realize pendulum impact test from IK01 to IK10, vertical impact test from IK07 to IK10 and ball impact test (Φ50mm and Φ100mm). The pendulum adopts swing pipe. The vertical impact and ball impact tests adopts electromagnetic release to ensure the hammer vertical fall down and ball Instantaneous fall. The test apparatus can move left and right back and forth, adjustable up and down, and the impact angle is adjustable.
Working principle: The sample is placed normally, the impact point is adjusted, the impact device is positioned, and release the hammer to freely impact the sample.
2. Parameter
| Swing Pipe | Steel pipe (Length: 1000mm, outer diameter: 15.9mm, thickness: 1.5mm), equip with hammers to equivalent mass |
| Lifting stroke |
200-1500mm (for pendulum and vertical impacts test) 200-2300mm (for ball impact test) |
| Drop mode |
Button control and electromagnet instantaneous release (for vertical impact and ball impact tests) Manual control (for pendulum impact test) |
| Impact hammers |
0.25kg nylon hammer for IK01 to IK06 Pendulum Impact Test 0.5kg, 1.7kg, 5kg, 5kg steel hammers for IK07 to IK10 Pendulum impact and vertical impact tests |
| Guideway | 200mm, 300mm, 400mm |
| Impact balls | Φ50mm and Φ100mm |
| Working power | 220V/50Hz |
4. Characteristics of Striking Elements
| Characteristics of Striking Elements | ||||||||
| Energy/J |
≤1 ±10% |
2 ±5% |
5 ±5% |
10 ±5% |
20 ±5% |
50 ±5% |
||
| Equivalent mass±2%kg | 0.25(0.2) | 0.5 | 1.7 | 5 | 5 | 10 | ||
| Material | Nylon | steel | ||||||
| R/mm | 10 | 25 | 25 | 50 | 50 | 50 | ||
| D/mm | 18.5(20) | 35 | 60 | 80 | 100 | 125 | ||
| f/mm | 6.2(10) | 7 | 10 | 20 | 20 | 25 | ||
| r/mm | - | - | 6 | - | 10 | 17 | ||
| l/mm | Depends | |||||||
5. Fall Height
| Fall Height | |||||||||||||||
| Energy/J | 0.14 | 0.2 | (0.3) | 0.35 | (0.4) | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 | ||
| Equivalent mass/kg | 0.25 | (0.2) | 0.25 | (0.2) | 0.25 | (0.2) | (0.2) | 0.25 | 0.25 | 0 .25 | 0.5 | 1.7 | 5 | 5 | 10 |
| Fall height±1%mm | 56 | (100) | 80 | (150) | 140 | (200) | (250) | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
6. Degrees of protection against external mechanical impacts
| IK01 | IK02 | IK03 | IK04 | IK05 | IK06 | IK07 | IK08 | IK09 | IK10 |
| 0.14J | 0.2J | 0.35J | 0.5J | 0.7J | 1J | 2J | 5J | 10J | 20J |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.