Mechanical SUS304 Withdrawal Force Testing Equipment IEC60884-1
Maximum and Minimum Withdrawal Force Testing Equipment for BS Socket-Outlet
1. Introduction
Maximum and minimum withdrawal force testing equipment is designed according to IEC 60884-1 Fig 18 and Fig 19 and VDE0620. The clamping system is easy to operate. The top plate swivels up from a horizontal position to a vertical orientation and the clamping device can be rotated in the top plate. These features allow the device to be set up in many different configurations to meet different standard requirements. Standard plugs and weights are supplied to perform testing on sockets rated up to 16A. Test plugs made from hardened steel with roughness not exceeding 0.8mm.Top plate pivots from horizontal to vertical.
2. Technical Parameters
| Standard test plugs |
2pcs (BS1363-1 Figure 11) (customized according to user's demands) Material: SUS304 Stainless steel (base) |
| Standard test pin |
2pcs Material: SUS304 stainless steel |
| Principal weight |
18N,40N,50N,54N (Combination weights) (customized according to standard requimrent) Material: SUS304 stainless steel |
| Supplementary weight |
4N, 5N, 5.4N (customized according to standard requimrent) Material: SUS304 stainless steel |
| Clamp device | 1 set for specimen, 1 set for weights |
| Dimension | 110×150×550(mm) |
| Standard | IEC60884-1 figure 18/19, VDE0620 |
Maximum and minimum withdrawal force for plugs and socket-outlets
| Ratings | Number of poles | Withdrawal force (N) | ||
|
Multi-pin gauge Maximum |
Single-pin gauge Minimum |
Single-pin gauge Maximum |
||
| ≤10A | 2 | 40 | 1.5 | 17 |
| 3 | 50 | |||
| ＞10A~16A | 2 | 50 | 2 | 18 |
| 3 | 54 | |||
| ＞3 | 70 | |||
| ＞16A~32A | 2 | 80 | 3 | 27 |
| 3 | 80 | |||
| .3 | 100 | |||
3. Structure descripation
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.