C60598-1 Clause 4.14.3 Bending Test Equipment For Adjusting Luminaire

Price Negotiable

Price: Negotiation

MOQ: 1 set

Delivery Time: 15 working days

Brand: PEGO

Product Description

Bending Test Equipment for Adjusting Luminaire Conforms to IEC60598-1 Clause 4.14.3

1. Introduction

The bending test equipment for adjusting luminaire is designed to meet the test requirement of IEC60598-1 clause 4.14.3. The flexible cord or cable of adjusting luminaire shall have no more than 50% of the strands in a conductor be broken and no serious damage to the insulation after continuously bending and torsion.

2. Parameter

Control mode	PLC control+touch screen interface
Test station	1
Application	Adjusting luminaire (like drawing board luminaires, shop-window spotlights, floodlighting luminaires)
Test driver	Servo motor
Twist angle	0-360⁰ adjustable (standard requirement: 125⁰ in both directions from the vertical)
Test frequency	1-10 times/min
Number of trials	0-999,999 cycles presetable (a cycle of operation is a movement from one extreme of the range to the other and back to the starting position, to make sure the rate of movement can reach 600 cycles/h)
Specimen adjustment	The fixture is manually clamped and adjusted up and down with AC motor, the maximum distance is 500mm
Maximum swing radius of the pendulum rod	R500mm, left and right of the platform, front and rear adjustment strokes are 0-500mm
Specimen clamping method	pressure plate and adjustable pressure block (three different fixtures can be distributed according to the sample base provided by the customer)
Test procedure	The touch screen can display bending angle, test cycles, number of trial
Alarm device	Flasher, auto stop
Dimension	1300mm750mm1600mm (LWH)
Working power	220V/50Hz