High Strength Rotating Casing Scraper Maintaining Clean Casing ID Corrosion Resistance

Oilfield Cementing Tool, High Quality Casing Scraper Maintaining Clean Casing ID

The Casing scraper is used to clean the cement, mud, embedded bullets, rust, mill scale, paraffin, perforation burrs and other substances from the inside walls of casing. Maintaining a clean casing ID is important to the operation of all tools used in drilling the well. Adhesive materials on casing walls will frequently cause these tools to become difficult to operation.

To scrape and clean the casing, simply pass the scraper through either with or without rotation. To check a perforated section for smoothness, run the scraper through the section without rotating. If the weight indicator does not show any irregularities the casing has been cleaned.

Every parts of the casing scraper are made of high quality steel, and fully heat treated. The scraper blades fit into machined recesses and are securely held by a dovetail keeper and spacer. The surface of casing scraper has the left hand helical grooves, and the edge is high hardness materials for maximum service. There are sufficient blades in the body to completely scrape the casing surface without rotating the tool.

The standard connection of the casing scraper is API REG box and pin. This allows the scraper to be installed in the drilling string between the bit and the bit sub. The bit works under the casing scraper, and has a function of guiding, and also prevents from jamming.

For any inquiries, please feel free to contact us.
 
Specification