IEC 60598-1 IPX5 IPX6 Hose Nozzle For Protection Against Water Jet Ф6.3mm Ф12.5mm
IEC 60598-1 IPX5 IPX6 Hose Nozzle For Protection Against Water Jet Ф6.3mm Ф12.5mm
Product Overview For IPX5 IPX6 Hose Nozzle For Protection Against Water Jet:
The IPX5 and IPX6 jet nozzles are used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water jets at degree IPX5 and IPX6.
Structure For IPX5 IPX6 Hose Nozzle For Protection Against Water Jet:
This device is manufactured according to IEC60598-1:2014, IEC60529:2013.
Place of use: temperature 15-35°C, relative humidity 25%-75%, atmospheric pressure 86 ~ 106kpa (860mbar-1060mbar), the ground should be flat, with lighting, water and drainage function is good
Use water source: clean water or tap water without impurities, and distribute water to clean the filter
Technical Parameters For IPX5 IPX6 Hose Nozzle For Protection Against Water Jet:
| IP Grade | IPX5 | IPX6 |
| Nozzle Internal Diameter | Ф6.3mm | Ф12.5mm |
| Water Flow per Standard requirements | 12.5±0.625L/min | 100±5 L/min |
| Distance from Nozzle to Enclosure Surface | 2.5~3m | |
| Core of the Substantial Stream | Circle of approximately 40 mm diameter at 2.5 m distance from nozzle | Circle of approximately 120 mm diameter at 2.5 m distance from nozzle |
| Test Duration | Likely 1min/m² (minimum: 3 min) | |
| Pressure Gauge | Measuring range: 0~0.25MPa | |
| Digital flow meter | 8L/min ~120L/min | |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.