IEC60529 Stainless Steel Sand And Dust Test Chamber

Price Negotiable

Price: Customized

MOQ: 1

Delivery Time: 30 Days

Brand: Sinuo

Product Description

IEC60529 Stainless Steel High Quality Sand And Dust Test Chamber

Product information:

The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment.

The test equipment uses intelligent and humanized PLC control system, the inner of the test equipment is made of high quality SUS304 stainless steel, the enclosure is A3 plate electrostatic spraying. And it also has large observation window and manual wiper device. The security protection is good.

The sand and dust test chamber is designed and manufactured according to IEC60529 Fig 2 IP5X and IP6X, IEC60598-1-2008, IEC60335-1 Clause 22.1 and etc.

Technical Parameters:

Model	SN4412
Working size(mm)	L1000W1000H1000
Outer size (mm)	L1610W1250H1950
Main technical parameters	Temperature range	Room temperature
	Test dust	dry talc which can go through the sieve of 75μm and the square sieve of wire diameter 50μm.
	Test sand (or talc) dosage	2kg/m³
	Vacuum pump	0~30Kpa
	Air pressure	0.5~1.0Mpa
	Sample rack height adjustment range	0~750MM
	Timing range	0~99 hours 59 min
	Timing accuracy	±1min
	Load cycle control	0~99 hours 59 min
	Ash blowing cycle control	1s~9999 min
	Sand and dust concentration	2～4kg/m3
	Air flow speed	≤2m/s

Model	SN4412
Working size(mm)	L1000W1000H1000
Outer size (mm)	L1610W1250H1950
Main technical parameters	Temperature range	Room temperature
	Test dust	dry talc which can go through the sieve of 75μm and the square sieve of wire diameter 50μm.
	Test sand (or talc) dosage	2kg/m³
	Vacuum pump	0~30Kpa
	Air pressure	0.5~1.0Mpa
	Sample rack height adjustment range	0~750MM
	Timing range	0~99 hours 59 min
	Timing accuracy	±1min
	Load cycle control	0~99 hours 59 min
	Ash blowing cycle control	1s~9999 min
	Sand and dust concentration	2～4kg/m3
	Air flow speed	≤2m/s

Product main configuration:

Device Name	Dust and Sand Test Chamber
Main configuration	Cabinet	Enclosure material	A3 plate electrostatic spraying
		Inner material	SUS304B Stainless steel
		Lead hole	The sample can be external power supply through this hole
		Observation window	large observation window in the middle of the door
	Electrical control system	Controller	PLC Control: A. blowing dust time (stop, blowing) can be adjusted B. Cycle: arbitrary adjustable C. Preset test time: 0.1H-9999.9H arbitrary adjustable D. Power: On-off- On E. There are accumulating function and power-off protection function
	Vacuum system	Equipped with a vacuum pump, pressure gauge, air filter, pressure regulator, connecting pipe
Security Protection Device	Power overload, short-circuit protection
	Ground Protection
	Voltage Protection
	Motor phase loss protection
	Alarm beep prompt
Power Supply	Three phase 380V, 50Hz,3KW

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Sinuo Testing Equipment Co. , Limited

Location Room 101, 1st Floor, No. 6, Third Street, Pingshan Industrial Zone 511495, Shibi Street, Panyu District, Guangzhou, China

Contact Person Zoe Zou

Request A Quote

Email Address *

Please check your email address.

Phone / WhatsApp

Your Message *

Your message must be at least 20 characters.

IEC60529 Stainless Steel Sand And Dust Test Chamber

BS EN 12983-1 Cookware Coating Pencil Hardness Tester for Cookware Surface Hardness Evaluation

IEC 62368-1 Clause 9.6.2 Figure 47 Figure 48 Figure 49 Steel Aluminum Disc Aluminum Foil

IEC 60061-3 Lamp Caps and Holders Gauges for Control of Interchangeability and Safety

IEC 62133-2 High Acceleration Shock Test System For Batteries Mechanical Shock Test

Refrigerator Performance Test Chamber Energy Efficiency Lab 10 Stations

IEC 60335-2 Microwave Oven Testing φ190mm Cylindrical Borosilicate Glass Vessel

IEC 61851-1 Plugs And Vehicle Connectors Cable Anchorage Pull Force And Torque Test Apparatus

ISO2244-2001 Inclined Plane Impact Test System With PLC Programming Control

IEC 60335-2-7 Durability Test Equipment For Electric Washing Machine Doors

ISO15502 Household Refrigerating Appliances Performance Lab 6 Stations

IEC 62368-1 Annex T10 Centre Punch For Glass Fragmantation Test

Hand - Held Protection Against Water Jets IPX5 IPX6 6.3 Mm Or 12.5 Mm

Get in Touch

Request A Quote