IEC60309-1 Vehicle Connectors And Plugs Fracture Capacity Vehicle Testing Equipment

Applied standard

IEC IEC60309-1

Applied clause

Clause 20 and 21

Test station

Single

Control method

PLC intelligent integrated control, with color humanized touch screen

Drive mode

Servo motor drive

Sample clamping method

Mechanical clamping, the position of clamping point can be adjustable along the 3-axis fixture

Linear stroke

0-100mm, can be preset (the spacing between test plug and test socket≥ 50mm)

Conduction time

0-99.9s, can be preset (electrical contact should be maintained no more than 4s, no less than 2s)

Speed of Insertion and Separation

0-0.85m/s can be preset, default(0.8±0.1)m/s)

Test frequency

0-10 cycles/min, can be preset (3.75cycles/min=7.5 stoke/min)

Test cycles

0~999999 cycles, can be preset

Load power

External, providing standard required voltage, current and power factor, the load cabinet is optional

Optional load cabinet

Note: only with AC load cabinet, 0-70A, voltage 0-300V

Test contents

Device coupler/charging interface disconnect capability test

Device coupler/charging interface normal operating life test

Detection function

Open circuit alarms can be implemented during load tests and cycles can be recorded in real time.

Safety protection

Ground protection, short circuit protection