IEC 60320-1 Single Station Coupler Pulling Test Equipment Connector Test For Household
IEC 60320-1 Single station Coupler Pulling Test Equipment Connector Test For Household
Standards For Coupler Pulling Test Apparatus:
IEC60320-1:2021 "Appliances couplers for household and similar general purposes- Part1:General requirements" clause 23.3 and figure 19.
Test principle For Coupler Pulling Test Apparatus:
Insert the connector into the device inlet corresponding to the type of connector to be tested and in accordance with the relevant standard table, and apply a lateral force to it using a spring force mechanism.
Technical parameters For Coupler Pulling Test Apparatus:
|
Test station |
Single station |
|
Flexible cable bending height |
40±2 mm,adjustable |
|
Power supply |
AC 220V, ±50Hz |
|
Working temperature |
5-35℃ |
|
Humidity |
30%-90% |
|
Pull force range |
0-100N |
|
Pulling method |
50 times in one direction and then 50 times in the opposite direction |
| Cable selection and corresponding pull value table |  |
| Appliance input socket | Optional gauge according to requirements |
Structure For Coupler Pulling Test Apparatus:
The connector test shall be equipped with an appliance air inlet corresponding to the connector model to be tested and in accordance with the relevant standard table.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.