IEC 61855 Figure 13-14 Hair Straightener Tension Uniformity Tester With Graph Illustrated
IEC 61855 Figure 13-14 Hair Straightener Tension Uniformity Tester with graph illustrated
Product Information:
Standard: Conform to IEC 61855 clause 5.8, figure 13 and 14.
Specimen and restrictions: Hair straightener.
Test purpose: Used to detect the tension uniformity of the hair straightener.
Test principle: Install 10 tension sensors on the fixed end of simulated hair, use a hair straightener to pull it from the top to the bottom, measure the tension value at each point and record the comparison.
Technical Parameters:
|
|
Input power | AC220V 50HZ |
|
|
Control method | PLC intelligent integrated control, 7-inch human-machine touch interface operation |
|
|
Drive mode |
Servo motor drive |
|
|
Simulate hair fixing end |
10 straight-line distribution points, 5m apart, each point is equipped with an independent tension sensor |
|
|
Simulate hair | Nylon rope |
|
|
Tension sensor range | 0-50N, real-time monitoring, load accuracy: ±0.5%, resolution 0.01N |
|
|
Test stroke | 600mm, including fixture height |
|
|
Pull direction | Vertical |
|
|
Hair straightener clamping force | 10N, spring clamp applied |
|
|
Hair straightener pull-down speed |
5mm/s, driven and speed controlled by servo motor |
|
|
Tension collection | It is collected in real time by PLC through the tension sensor and transmitter, and each point is displayed with a tension curve. |
|
|
Sample power supply |
The equipment comes with a universal power socket and mains power |
|
|
Configuration |
Nylon rope, 1am and 2mm diameter, 20m long |
| 14. | Equipment dimensions | WDH=500x500x1100mm, 80kg |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.