Sand and Dust Test Chamber for Automotive Electronics IP5X IP6X IEC60529 Testing
The Sand and Dust Test Chamber is a high-performance environmental simulation testing system designed in strict accordance with IEC 60529 IP5X / IP6X standards. It is widely used to evaluate the dustproof performance and sealing reliability of electrical and electronic products, automotive and motorcycle components, outdoor equipment enclosures, and sealing systems and connectors.
This advanced dust ingress testing equipment simulates real-world sandstorm and airborne dust environments to determine how particulate contamination impacts product durability, safety, and performance.
- Accurate IEC60529 Compliance: Fully meets IP5X & IP6X dust protection test requirements, ensuring global compliance for certification.
- Real Sandstorm Simulation: Recreates natural and vehicle-induced dust environments, improving product reliability validation.
- Intelligent PLC Control System: Equipped with PLC + touchscreen interface, enabling precise control over dust blowing cycles, test duration, vacuum timing, and airflow parameters.
- High-Efficiency Dust Circulation Design: Innovative conical funnel + bottom suction + top dispersion system ensures uniform dust distribution, continuous circulation, and repeatable test conditions.
- Durable Industrial Structure: Stainless steel inner chamber (SUS201 mirror finish) with anti-corrosion coated outer body for long service life under harsh testing conditions.
The system adopts a closed-loop dust circulation mechanism: dust is collected at the bottom funnel, a high-pressure turbine fan extracts and transports dust, dust is redistributed from the top of the chamber, and gravity ensures uniform downward dispersion.
This continuous cycle accurately reproduces dust-laden airflow environments, essential for IP dust ingress testing.
| Parameter | Specification |
|---|---|
| Inner chamber size | 1500*1000*1500mm (W*D*H) |
| Outer chamber size | Approx. 2000*1800*2300mm (W*D*H) |
| Dust baking temperature range | RT+10℃～60℃ |
| Fine dust | Below 75um |
| Air flow rate | No more than 2m/s |
| Dust concentration | 2kg/m³ |
| Talc dosage | 2～5kg/m³ |
| Dust blowing method | Top-down |
| Air flow meter | 1-20L/M |
| Metal mesh wire diameter | 50um |
| Nominal spacing between lines | 75um |
| Shock time | 1s～99h (adjustable) |
| Test time timing | 1s～99h (adjustable) |
| Dust-blowing control cycle | 1s～99h (adjustable) |
| Vacuum time | 1s～99h (adjustable) |
| Circulation fan | Closed alloy low-noise motor. Multi-blade centrifugal fan |
| Air flow meter | The vacuum rate is measured using a digital flow meter |
| Load-bearing | Max. 100kgs |
| Observation window | 1 pcs |
| Lighting | 1 pcs |
| Control system test piece power socket | Dustproof socket AC220V 16A |
| Control system | PLC controller + touch screen (Sinuo) |
| Vacuum system | Pressure regulating valve, suction nozzle, pressure regulating three-piece set, connecting pipe, vacuum pump |
| Dust heating system | Stainless steel mica heating jacket |
| Inner chamber material | SUS201 stainless steel mirror panel |
| Outer chamber material | A3 iron plate electrostatic spraying treatment |
| Power | 3KW (no load) |
| Safety protection system | Phase sequence protection, leakage protection, abnormal protection, instrument over-temperature protection |
- What standards does this dust test chamber comply with?
It complies with IEC 60529 IP5X and IP6X, widely required for enclosure protection testing. - What type of dust is used in testing?
Standard talcum powder with particle size below 75μm is used to simulate fine dust conditions. - Is it suitable for automotive testing?
Absolutely. It is commonly used for automotive components and sealing system validation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.