IEC60335-2-11 Drum Washing Machine Door Endurance 200N 1.5m/s PLC Control Testing Equipment

Standards & Clauses:

IEC60335-2-11:2008 “Household and similar electrical appliances-Safety-Part2-11:Particular requirements for tumble dryers” clause 20.101

IEC60335-2-7:2016 “Household and similar electrical appliances-Safety-Part2-7:Particular requirements for washing machines” clause 18 and 22.104

IEC60335-2-4:2006 “Household and similar electrical appliances-Safety-Part2-4:Particular requirements for spin extractors” clause 18

Samples and Restrictions:

Electric tumble dryer, electric washing machine (including pulsator and tumble type single phase ≦ 250V, other ≦ 480V), spin extractors (Load capacity ≦10kg, tumble line speed ≦50m/s, single phase ≦250V, other ≦480V)

Application:

It is used to test the durability of the interlocking device of washing machine door or lid, and the force test when the interlock is actuated, so as to verify the reliability of the interlocking device; also used to assist other tests for repeated opening and closing operations of the washing machine door or lid.

Test Principle:

The on/off actions of the interlocking device are controlled through developed program, the manipulators are driven by servo motor to reciprocating open and close the door or lid at a certain speed with vacuum suction cup sucking on the door or fixture clamping the lid, thus, to verify the reliability of the interlocking device. A force sensor is mounted on the manipulators to form a closed loop control with the servo motors, to accurately control the door or lid opening/closing force values.

Structure:

The equipment combines of electrical control cabinet (including load voltage regulating device), frame and manipulators. There are two testing station, one is for tumble washing machine with door, the other is for pulsator washing machine with lid, the two workstations can process testing independently.

Equipment dimensions: approx.: (W*D*H)2500 * 1300 * 1300 (mm)

Equipment weight: 180kg

Use Environment:

Power supply: AC220V±10%/ 50-60 Hz, power 6KW or match client's local power supply

Air source: 0.5-0.7MPa compressed air

Use place: atmospheric pressure 80~106kpa; ambient temperature 5~40°C; relative humidity (20~80) %RH; No violent shaking and vibration, no electromagnetic interference, no dust, no explosive and corrosive gas, with good heat dissipation.

Technical Parameters: