IEC 60884-1 Figure 8 Compression Resistance Performance Tester For Plug 300N Single Working Station

Standard: IEC 60884-1 2013 clause 10.1, 24.5 and figure 8

Application: This device is use for testing the compression resistance performance of plug, check whether the mechanical strength of plug comply with standard requirements.

Test sample: Plugs

Feature: This device applying compression force 300N by weights. The temperature of the pressure plate, of the base and of the specimens being 23±2℃, compress the plug in two position show as figure 8a) and 8b), each position for 1min.

Parameters:

Test method:

The specimens are subjected to a compression test as shown in figure 8, the temperature of the pressure plate, of the base and of the specimens being (23±2) ℃ and the force applied being 300 N.

The specimens are first placed in position a), as shown in figure 8, and the force is applied for 1 min. They are then placed in position b), as shown in figure 8, and again subjected to the force for 1 min.

The specimens are removed from the test apparatus and after 15 min they shall show no damage within the meaning of this standard.

Notice:

1. Please do not damage the appliance shape (such as scratching, bending, etc.).

2. Prevented from dust and moisture environment, in order to avoid the oxidation to affect the dimensional accuracy.