750mm Switch Life Tester IEC 60884-1 Fig. 29 Multiple Portable Socket - Outlets Mechanical Strength Test Apparatus
IEC 60884-1 Apparatus for Mechanical Strength Test on Multiple Portable Socket-outlets
Product information:
The socket-outlet mechanical strength test apparatus meets the requirements of IEC 60884-1 2013 clause 24.9 and figure 29. The apparatus is used to test the mechanical strength of multiple portable socket-outlets when rewirable multiple portable socket-outlets are fitted with the lightest type of flexible cable of the smallest nominal cross-sectional area.
Technical parameters:
| Drop height | 750mm |
| Distance to fixed end | 2250mm |
| Test Times | 8 times |
| Rotation action | Every 45°, 8 directions can be rotated |
| Operation method | Manual release |
| Conforms to standard | IEC 60884-1 2013 clause 24.9 and figure 29 |
Test procedures:
The free end of the flexible cable is fixed to a wall at a height of 750mm above the floor, as shown in figure 29.
The specimen is held so that the flexible cable is horizontal and then it is allowed to fall onto a concrete floor, eight times, the flexible cable being rotated through 45° at its fixing after each fall.
After the test, the specimen shall show no damage within the meaning of this standard; in particular, no part shall have become detached or loosened.
The fixtures for the specimen on the two ends of this apparatus
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.