BS EN 12983-1 Cookware Handle Bending Strength Test Apparatus

Product information:

It is used to perform fatigue resistance test on cookware handles. The handle assembly should withstand 15,000 cycles of operation, and the handle or connecting parts will not be permanently deformed or loosened. Without affecting safety and performance, the deformation within 5% of the total length from the end can be ignored.

Applied standard:

The design of the handle fatigue resistance test apparatus of cookware complies with BS EN 12983-1:2020 clause 7.6 and Appendix E.

Technical Parameters:

1. Power supply: AC220V, 50HZ

2. Test station: 1

3. Drive mode: electric + eccentric wheel mechanism

4. Test speed: 5-30 times/min, adjustable

5. Rubber plate: 5mm thick, hardness 50±10 Shore;

6. Sample fixture: 1 set of single-handle fixing jig, 1 set of double-handle fixing hook;

7. Lifting height of the level surface: 300mm;

8. Test mass: one of each 2kg, 1kg, 500g;

9. Counter: 0-999999 times can be set, when the cumulative number of times reaches the set value, the buzzer will alarm and the equipment will stop running.