IEC 60335-2-14 Similar Test Probe B With φ125mm Circular Stop Face
IEC 60335-2-14 Similar Test Probe B with φ125mm Circular Stop Face
Product information:
This is a precision test finger made in accordance with many standards like IEC 61032 figure 2, IEC 60529 IP2, IEC60950 figure 2A, IEC60884, IEC60335, UL507, and UL1278 figure 8.4. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test finger probe consists of dito,finger,base and insulated handle which simulates the characteristics of the human hand. It has two movable joints, which can be curved at 90°.
Customizable: it can be used for anti-electric shock test when equipped with alligator clip, or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer).
Technical parameters:
| Parameters /Model |
SN2210-2B |
| Name | Test probe similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm |
| Joint 1 | 30±0.2 (mm) |
| Joint 2 | 60±0.2 (mm) |
| Finger tip to stop face | 100 (mm) |
| Finger tip to guard | 180 (mm) |
| Stop face to guard | 80 (mm) |
| Guard diameter | 75 (mm) |
| Cylindrical | R2±0.05 (mm) |
| Spherical | S4±0.05 (mm) |
| Fingertip cutting bevel angle | 37o 0 -10’ |
| Fingertip taper | 14 o 0 -10’ |
| Test finger diameter | Ф12 0 -0.05 (mm) |
| Applied standard | IEC60335-2-14 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.