IEC 62368-1 Annex V.1.6 Test Rod Probe With 1N Force
IEC 62368-1 Annex V.1.6 The Test Rod Probe with 1N Force
Product information:
This probe conforms to the standard requirement of IEC61032 test probe D, required by IEC 62368-1:2018 Annex V.1.6, IEC60529 for IP4, IEC60065 and etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
Customizable: It can be used for anti-electric shock test when equipped with alligator clip. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer). The probe whose model number is with "T" is with force.
Technical parameters:
| Parameters /Model |
SN2210-4 (Optional) |
SN2210-4T |
| Name | Test rod probe D | Test rod probe D with force |
| 1 | Ф1+0.05 0 (mm) | Ф1+0.05 0 (mm) |
| 2 | SФ35±0.2 (mm) | SФ35±0.2 (mm) |
| 3 | Ф10 (mm) | Ф10 (mm) |
| 4 | 100±0.2 (mm) | 100±0.2 (mm) |
| 5 | 100 (mm) | ---- |
| 6 | ---- | 1N force |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.