The high density cleaner for the heavy slag in the waste carton paper pulp

The high-concentration slag remover is an ideal device for removing high-quality metals, sand, and other heavy impurities in the pulp at a higher concentration to obtain high-quality pulp. It is also necessary for the purification of waste paper pulp. Equipment.

The high-concentration slag remover uses the different specific gravity of fiber and impurities to separate impurities. The slurry enters the slag remover at a certain pressure from the feed tee and rotates at high speed. Due to the different centrifugal force, heavy impurities are thrown to the wall of the device. Under the action of gravity, it gradually runs towards the bottom of the cone and enters the sedimentation tank. Due to the small centrifugal force, the fiber gradually moves to the low-pressure area of the center, and after the bottom reaches the vortex, it rises up and is finally discharged from the good pulp port. The cone of the high-concentration slag remover has a certain taper, and the cone is longer. The rotation radius of the slurry in the cone gradually decreases, which prevents the speed of the pulp flow from decreasing during the rotation process, and ensures that the centrifugal force is strengthened, thereby improving the paper material. Purification efficiency. The balance water pressure at the bottom is slightly greater than the slurry pressure, so that the fibers cannot enter the sedimentation tank, and only heavy impurities such as sand, metal particles, rubber blocks, and plastic sink into the tank, which reduces fiber loss.