Stainless steel low consistency waste paper pulp cleaning equipment to remove the light impurities

The combined high-efficiency light and heavy impurity slag remover is an important pulp purification and slag remover in the paper industry. The shape of the slag remover is a cone with a cone angle of about 8-13 degrees. It is made of stainless steel, hard rubber, ceramic or cast iron lined with a polyethylene-based plastic layer. Its inner wall is smooth and smooth, and has the characteristics of wear resistance, pressure resistance, corrosion resistance, etc., and does not deform at a temperature of 40-60 ° C. Use vortex motion to remove heavier impurities. The slag removal efficiency is higher than the eddy current slag remover, which can significantly reduce the dustiness of the pulp. And can be bundled or connected in parallel, tailings can be segmented. Re-selection, reducing the loss of pulp deslagging

The inlet and outlet slurry pipes and brackets of the slag remover are carbon steel / stainless steel. The surface is polished and treated with multiple painting processes, which has the functions of anticorrosion and rust prevention. The inner wall of the inlet and outlet slurry pipes has undergone strict polishing treatment, and there is no phenomenon of hanging slurry and blocking the pipeline;

The lower end of the slag remover is equipped with a ceramic slag remover to improve the service life of the slag remover. The ceramic pulp reducer is added at the last stage to minimize the fiber loss of the slag remover, directly reduce the operating cost of the equipment, and at the same time can maximize the product quality of the finished paper.