Steel Tube FBT Optical 1310 1550nm 1×4 WDM Fiber Coupler
Less MOQ FTTH Dual Window Splitter Ratio LC/UPC 1x2 Fbt Coupler WDM
Basic Information:
1x4 Triplexer WDM Coupler is designed for the "triple-play" fiber to the home (FTTH) systems. It can be used to mux/demux three wavelengths at 1310nm, 1490nm, and 1550nm that carry the voice, data, and video services.
This device has a 1 to 4 port configuration. All three wavelengths are fed into the device through the common input port. One wavelength is reflected from one output port and the other two wavelengths pass through the device at the other output port. This device is bi-directional. It supports optical traffic in both directions.
FBT WDM Benefit&Features:
- Variety of coupling ratios (1x2, 1x4, 1x6, etc)
- Wide passing bands
- High isolation between channels
- Low insertion loss
- High stability and reliability
FBT WDM Benefit&Features:
* GR-1209-CORE Requirements for passive optic components
* GR-1221-CORE Reliability assurance requirements for passive optical components
* GR-326-CORE Requirements for single-mode optical connectors sand jumpers assemblies
* TIA-604 Fiber optic connector interpretability standard
* ROHS Directive on the restriction of hazardous substances
WDM Applications:
- Fiber optical system tests
- Optical amplifiers
- Optical LAN systems
- Optical communication systems
Specifications& Technology Parameters:
| Fiber Type(dB) | Corning HI1060flex or OFS BF05635-02 | SMF-28e | |||||||
| Operating Wavelength(nm) | 980 & 1550 | 1060 & 1550 | 1310 & 1550 | 1480 & 1550 | |||||
| Operating Bandwidth(nm) | ±10/20 | ±15 | ±15 | ||||||
| Grade | P | A | P | A | P | A | P | A | |
| Insertion Loss(dB) | ≤0.15 | ≤0.25 | ≤0.30 | ≤0.40 | ≤0.2 | ≤0.3 | ≤0.3 | ≤0.35 | |
| Isolation(dB) | ≥20 | ≥18 | ≥20 | ≥18 | ≥25 | ≥18 | ≥25 | ≥18 | |
| PDL(dB) | ≤0.05 | ≤0.1 | ≤0.05 | ≤0.1 | ≤0.05 | ≤0.1 | ≤0.1 | ≤0.1 | |
| Directivity(dB) | ≥55 | ||||||||
| Operating Temperature(℃) | -40 ~ +85 | ||||||||
* The above specification is excluding the connector
* Other specification can be made on customer requires
Ordering Information:
| WDM- | N- | XX- | XX- | X- | XX- | XX- | X | |||
| 95:980&1550nm 135:1310&1550nm 65:1060&1550nm 45:1480&1550nm | 01: :SMF-28e 02: HI1060flex, 03: OFS BF05635-02 |
1:1m X:customization |
25:250μM Fiber 09:900μM loose Fiber 20: 2mm cable 30: 3mm cable |
SC:SC/UPC SA:SC/APC ...... 00:No connector |
A: A B: B C: C |
|||||
| Grade | Operation Wavelength | Fiber Type | Fiber Length | Pigtail Type | Connect Type | Dimension | ||||
WDM Cable Type:
1. Single-mode fibers allow one mode to propagate.
2. Multimode fibers support the propagation of multiple modes.
3. Wavelength range is the range of wavelengths the WDM will operate in.
4.Channel spacing is the center-to-center difference in frequency between neighboring channels. Two hundred GHz corresponds to .4 nm spacing, 100 GHz corresponds to .2 nm spacing, and 50 GHz corresponds to .1 nm spacing.
5. Number of channels is the number of channels the device has to send information. This number can range from 4 to 160 with design enhancements adding more channels.
Package
Original Carton Package;
As customers‘ requirement.
Wuhan Geehe Comm Service:
-- Continuous improvement; accepting new challenges
-- Innovating new processes, and creating new products for the benefit of our customers
-- Free samples for testing
-- Factory inspection, also accept the third party inspect
-- Younger Team
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.