Mexican RN-100 Steel Decking Floor Roll Forming Machine 0.8mm

Mexican RN-100 Steel Deck Roll Forming Machine 0.8mm Thickness

Floor bearing plate(metal deck roll forming machine/metal deck bending machine) is also called a variety of ways such as combination floor plate, floor bearing plate, steel bearing plate, pressure type steel plate, floor plate, steel floor bearing plate, combination floor plate, galvanized steel bearing plate, galvanized floor plate, galvanized floor plate, combination floor plate, combination floor plate, floor steel bearing plate, building pressure type steel plate, combination floor plate, etc., and is divided into: open floor bearing plate(floor decking roll forming machine/ floor decking bending machine), fully closed type floor bearing plate, dovetail type floor bearing plate, etc. Floor forming machine steel structure column network spacing generally 5 ~ 9.0m × 8 ~ 15m, secondary beam spacing of 3m, and floor plate off the material length of 4.97 ~ 8.97m, transport and installation are more difficult, especially with the vertical lifting floor plate by the arc area, from top to bottom in the secondary beam narrow wear set more difficult, and disrupt the secondary beam welding normal process. (roof deck roll forming machine/ roof deck bending machine)Control down the length of the material for 3 ~ 6m, can avoid vertical transportation in the secondary beam between the problem can not be lifted. Special soft slings are used for the lifting of floor joists. The soft slings should be checked for tears and cuts each time they are lifted.

Floor joists should be protected from probes when resting on steel beams. The operator should wear a safety belt when laying the material and ensure that it is fixed to the perimeter safety rope while laying. (Steel deck roll forming machine/Steel deck bending machine)

Flow chart of Mexican RN-100 Steel Deck Roll Forming Machine 0.8mm Thickness:

Hydraulic decoiler--Guiding--Embossing--Roll forming--Hydraulic cut--Out table

TRD91.5 is a special type of floor slab in Mexico, which is the standard version of Ternium, also known as LOSACERO 15. this version is only used in Mexico and this line is also exported to Mexico.

Mexican Losacero 15 TRD91.5 Steel Deck Roll Forming Machine Metal Panel Parameters:

Pictures of Mexican RN-100 Steel Deck Roll Forming Machine 0.8mm Thickness: