Residential IP65 Protection BMS Lithium Battery For Home Solar System
CAUTIONS
•Do NOT short circuit, reverse polarity, crush or disassemble.
•Do NOT heat or incinerate.
•Do NOT immerse in any liquid.
•Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.
CHARGE PERFORMANCE
| Recommended Charge Current | 20A |
| Maximum Charge Current | 100A |
| Recommended Charge Voltage | 57.6V |
| BMS Charge Cut-Off Voltage | <58.4 V (3.65V/Cell) |
| Reconnect Voltage | >57.6 V (3.6V/Cell) |
| Balancing Voltage | <57.6 V (3.6V/Cell) |
| Maximum Batteries in Series | 16 (*Consult MUST) |
DISCHARGE PERFORMANCE
| Maximum Continuous Discharge Current | 100 A |
| Peak Discharge Current | 110 A (3s) |
| BMS Discharge Cut-Off Current | 150 A (300ms) |
| Balancing open voltage | 55.2 V (3.45V/Cell) |
| Recommended Low Voltage Disconnect | 44 V (2.75V/Cell) |
| BMS Discharge Cut-Off Voltage | >32.0V (2s) (2.0V/Cell) |
| Reconnect Voltage | >40.0 V (2.5V/Cell) |
| Short Circuit Protection | 250 ~ 500 μs |
HEATING FOIL PERFORMANCE
| Heating Temperature Range | -4 to 41 ºF (-20 to 5 ºC) |
| Heating Time | Approximately 1 hour @ 7.5 A |
| BMS Heating Foil Cut-Off | 158 ºF (70 ºC) |
Suitable :
•Solar Storage
•Base transceiver station
•Communication equipments
•Central office
•Telecommunication systems
•Microprocessor based office machine
How to store:
Batteries should be stored away from sunlight, heat, and humidity. Keep the storage area ventilated and dry, and maintain a relatively steady temperature. The ideal battery storage temperature is around 59℉, but most room temperatures will suffice.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.