MF Hardner Curing Agent Melamine Lamination Resin Additives
 
 
Product Description:

 
if you want to know more about the product,please contact with us ,we will reply to you in 24 hours. 
 
Product  introduction
 
Fenteng CT0233 is a curing agent suitable for the production of impregnated paper with low pressure, it can only be used in Melamine formaldehyde (MF) resin.
 
THE CT0233 speeds up the curing of melamine impregnated and laminated paper during the press-and-paste process. Compared with traditional curing agents, this curing agent has higher latency, making the glue flow and ductility better under pressure, and curing more uniformly. Improves the clarity of the wood grain of impregnated paper.
 
Higher latency mean doesn't show curing ability at room temperature (25 ℃), and active time after adding is 8-12 hours. After temporary machine maintenance , new patch of glue is not needed, saving work time. At low temperature (< 120 ℃), the curing process is slow, the resin has time spread enough, meanwhile rapid curing at high temperature provides uniformity. Dry/wer flaw, heat mark can be reduced.
 
 
Note:
 
the curing agent should be added at last, after other additives. the curing time should be tested. Only after the curing time reaches the qualified value, can it be poured into the glue tank.