High Temperature Latent Curing Agent Additives For MF Resin
 
 

 
Product  introduction
 
Fenteng CT0012 is a curing agent suitable for the production of impregnated paper with low pressure, it can only be used in urea formaldehyde (UF) resin.
 
CT0012 can effectively cure UF resin, to prevent UF resin seeping to melamine resin on surface, avoiding poor surface sealing and adhesion of impregnated paper. With CT0012, temperature in the hot pressing can be increased, flow time of UF resin can be prolonged, dry / wet flaw can be reduced, the heat resistance during storage can be increased, storage time can be prolonged.
 
CT0012 doesn't show curing ability at room temperature (25 ℃), and active time after adding is 8-12 hours. After temporary machine maintenance , new patch of glue is not needed, saving work time. At low temperature (< 120 ℃), the curing process is slow, the resin has time spread enough, meanwhile rapid curing at high temperature provides uniformity. Dry/wer flaw, heat mark can be reduced.
 
 
Note:
 
the curing agent should be added at last, after other additives. the curing time should be tested. Only after the curing time reaches the qualified value, can it be poured into the glue tank. 
 

Who is suitable for using our products?

Manufactory of Melamine decor paper and trader of addtitives for MF / UF resin.

Melamine impregnated paper producers and traders are welcome to contact me and we can offer a full range of amino resin additives and application solutions.

About FenTeng:

Fenteng Fine Chemical Technology (Foshan) Co., Ltd. is a research and development, production, sales in one of the integrated manufacturers, the company's products and application technology is mainly suitable for all kinds of impregnated decorative cartons wood-based panel substrate production field.

The company not only provides a full range of chemical additives, but also provides melamine paper manufacturers with a full set of pre-sales and after-sales solutions, which can provide customers with a full range of technical support such as equipment selection, resin production, and process flow.

Our additives are suitable for the production of the following products:

Low pressure melamine plate impregnated paper

High pressure fireproof board impregnated paper

Phenolic resin template impregnated paper

Particleboard and medium density fiberboard impregnated paper