Salmonella IgG/IgM Rapid Test Cassette Test Kit

INTENDED USE

The typhoid Test Device is a rapid chromatographic immunoassay for the qualitative detection of IgG and IgM antibodies to Salmonella typhi in serum plasma, or whole blood.

TEST PROCEDURE

Step 1: Bring the specimen and test components to room temperature, if refrigerated or frozen. Mix the specimen well prior to assay once thawed.

Step 2: When ready to test, open the pouch at the notch and remove device. Place the test device on a clean, flat surface. Step 3: Be sure to label the device with specimen’s ID number. For detection of Dengue IgG/IgM or Dengue AgNS1 For serum or plasma specimen : Hold the dropper vertically and transfer 3 drops of serum or plasma (appoximately 100μl) to the specimen well(s) of the test device, then start the timer. For whole blood specimen : Hold the dropper vertically and transfer 1 drops of whole blood (appoximately 35μl) to the specimen well(s) of the test device, then add 2 drops of buffer (appoximately 70μl) and start the timer. For detection of Dengue AgNS1 For serum or plasma specimen : Hold the dropper vertically and transfer 3 drops of serum or plasma (appoximately 100μl) to the specimen well(s) of the test device, then start the timer. For whole blood specimen : Hold the dropper vertically and transfer 1 drops of whole blood (appoximately 35μl) to the specimen well(s) of the test device, then add 2 drops of buffer (appoximately 70μl) and start the timer.

Step4: Set up timer.

Step5: Results can be read after 20 minutes. Do not read result after 30 minutes. To avoid confusion, discard the test device after interpreting the result