Snap in Farad Super Capacitor 400F 2.7V For Power Energy Storage
Ultracapacitor 400F 2.7V Super Capacitor For Power Energy Storage
1. Feature:
- Virtually long cycle life; can be cycled 1000000 times
- High specific power; low resistance enables high load currents
- Charges in seconds; no end-of-charge termination required
- Simple charging; draws only what it needs; not subject to overcharge
- Military-standard quality and safe
- Excellent low-temperature charge and discharge performance (- 40 ℃-70C)
2. Application:
- Backup power: RAM, detonator, auto recorder, intelligent instrument, vacuum switch, digital camera, motor drive
- Energy storage: smart three meters, UPS, security equipment, communication equipment, flashlight, water meter, gas meter, car tail light, small home appliances
- High-current work: electrified railway, smart grid control, hybrid vehicle, wireless transmission
- High-power support: wind power generation, locomotive starting, ignition, electric vehicles, etc
3. Standard Test Conditions
- The test conditions of this specification is for standard atmospheric pressure, temperature of 25 + / - 1 ℃, relative humidity for less than 60%.
- The test standard: QC/T 741-2014 Automotive Super capacitors
DL/T 1652-2016 Technical Specification for Super capacitors for Power Metering Devices
3. General Specifications
|
Rate discharge Cap. F(25℃) ( ΔV＝2.16V-1.35V) |
Cap. Tolerance (25℃) |
Rated Voltage (V) |
Operating Temp. (Top) |
ESR (1KHz) (mΩ) |
| 400 | 0%~+30% | 2.7 | -40~70℃ | 10 |
4.Product Structure
This capacitor is on the basis of theory of double layer capacitor. Internal using activated carbon as positive and negative electrodes, separated by electrolyte and diaphragm between two electrodes, To seal using aluminum shell and rubber plug. The lead terminals are on the same side of the capacitor.
5.Performance Index
| ITEM | Specification | |
| 1 | Temperature Characteristics | Temperature +70℃,|△C/C| ≤30%,ESR≤specified value(25 ℃); Temperature -40 ℃,|△C/C|≤30%,ESR≤ 4 times initial value(25 ℃) |
| 2 | High temperature load | Temperature +70 ℃ added rated voltage, after 1000h,|△C/C|≤30%,ESR≤ 4 times specified value. |
| 3 | High temperature without load | Temperature +70 ℃added rated voltage, after 1000±4h,|△C/C|≤30%,ESR≤ 2 times specified value. |
| 4 | The steady state damp heat test | Temperature +40 ℃, 90-95% RH, 240hrs later, |△C/C|≤30%, ESR≤ 4 times specified value. |
| 5 | Cycle life Expectancy | added rated voltage, under room temperature, cycling charge and discharge testing for 500000 times, |△C/C|≤30%,ESR≤ 4 times initial value(25 ℃) |
6. Mark
7. Outline Drawing and Dimensions
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality. Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.