560KΩ 5% Tape ±100PPM Metal Film Resistor Fixed 2 Watt Resistor
Metal Film Resistor Fixed Resistor 2 Watt 560KΩ 5% Tape ±100PPM
Metal film resistor is widely used so far. Compared with carbon film resistor, this resistor has small volume, low noise, good stability, but high cost. lt is often used as precision and high stability resistor.
Because it is a lead type resistance, simple and light structure, convenient manual installation and maintenance, often used in a variety of household appliances, communications, instrumentation and radio resistance equipment.
Main Parameters
Resistance type: metal film resistor
Rated power : 1/8w,1/4W,1/2w,1W,2W,3wPrecision resistance :±1%
Temperature coefficient: ±100ppm/°c
Production process: porcelain tube plating on alayer of alloy material
Resistance shape: cylindrical
Number of color rings :5 color rings
Operating Temperature: -55℃~+155℃
Part Number:
| TMRM | - | 1 2 3 4 | 5 | 6 7 | 8 | 9 10 | |||
| Produce Code TMRM: Precision Metal Film Resistor | Resistance Value Code: Three digits: The first two digits are significant figures and the third one denotes number of zeros. 394=390KΩ Four digits: The first three digits are Significant figures and the fourth one denotes number of zeros.1201=1.2K Ω | Tolerance F=±1% G= ±2% J=± 5% | Rated Power: One digits: 1= 1W 2= 1/2W 3= 3/4W 4= 1/4W 8= 1/8W L= 1/10W M=1/16W N=1/20W O=1/32W Two digits: XS=2WS YS=3WS... | Packaging T:tape&reel B:bulk | Terminal: empty value: general type F:Vertical form M:Horizontal form | ||||
| - | |||||||||
Electrical Characteristics:
| Power Rating | Dimensioins(mm) | Resistance Range(Ω) | Max. Working Voltage | Max. Overload Voltage | Dielectric Withstanding Voltage | |||
| D | L | H | d±0.05 | |||||
| 1/6W 1/8W | 1.8±0.2 | 3.2±0.5 | 28±2 | 0.4 | 1-10MΩ | 300V | 300V | 300V |
| 1-10MΩ | 500V | 500V | 300V | |||||
| 1/4W | 2.3±0.5 | 6.5±0.5 | 28±2 | 0.45 | 1-10MΩ | 500V | 500V | 500V |
| 1/2WS | 2.3±0.5 | 6.5±0.5 | 28±2 | 0.45 | 1-10MΩ | 700V | 700V | 500V |
| 1/2W | 3.2±0.5 | 9.0±0.5 | 26±2 | 0.5 | 1-10MΩ | 700V | 700V | 700V |
| 1WS | 3.2±0.5 | 9.0±0.5 | 26±2 | 0.5 | 1-10MΩ | 800V | 800V | 700V |
| 1W | 4.5±1.0 | 11.5±1.0 | 35±3 | 0.7 | 1-10MΩ | 800V | 800V | 900V |
| 2WS | 4.5±1.0 | 11.5±1.0 | 35±3 | 0.7 | 1-10MΩ | 800V | 800V | 900V |
| 2W | 5.0±1.0 | 15.5±1.0 | 33±3 | 0.7 | 1-10MΩ | 800V | 800V | 1000V |
| 3WS | 5.0±1.0 | 15.5±1.0 | 33±3 | 0.7 | 1-10MΩ | 500V | 1000V | 1000V |
| Characteristics | Limits | Test Method |
| Operating Temperature Range | -55℃—+155℃ | |
| Insulation Resistance | 10000MΩminimum | |
| Dielectric Withstanding Voltage | No flashover or insulation damage | AC Potential respectively in the list for 60 seconds |
| Temperature Coefficient | ±100mmp/℃ | Test Temperature: Room Temperature +100℃ |
| Short Time Over Load | ±(1%+0.05Ω) | 2.5 times rated voltage for 5 seconds |
| Temperature Cycling | ±(1%+0.05Ω) | -40℃~85℃ for 5 cycles |
| Load Life in Moisture | ±1% | Rated voltage 1.5hr"on",0.5hr"off"at 40℃, 95%RH for 1000 hours |
| Load Life | ±1% | Rated voltage 1.5hr"on",0.5hr"off" at 70℃ for 1000 hours |
| Solderability | At least 95% coverage | 255℃ for 3 seconds |
| Hot Resistance of Solder | ±(0.25%+0.05Ω) | 350℃ for 3 seconds |
Dimension(mm):
| Power | Dimension(mm) | |||||
| L±1 | D±0.5 | d±0.05 | P±1 | W1±1 | W2±1 | |
| 1/8W(1/4WS) | 3.50 | 1.70 | 0.40 | 5.00 | 52.00 | 64.00 |
| 1/4W(1/2WS) | 6.00 | 2.30 | 0.40 | 5.00 | 52.00 | 64.00 |
| 1/2W(1WS) | 9.00 | 3.20 | 0.48 | 5.00 | 52.00 | 64.00 |
| 1W(2WS) | 11.00 | 4.50 | 0.68 | 5.00 | 63.00 | 75.00 |
| 2W(3WS) | 15.00 | 5.00 | 0.68 | 5.00 | 68.00 | 80.00 |
| 3W(5WS) | 17.00 | 6.00 | 0.68 | 10.00 | 71.00 | 83.00 |
| Power | Dimension(mm) | |||
| L±1 | D±0.5 | d±0.05 | H±2 | |
| 1/8W(1/4WS) | 3.50 | 1.70 | 0.40 | 27.00 |
| 1/4W(1/2WS) | 6.00 | 2.30 | 0.40 | 26.00 |
| 1/2W(1WS) | 9.00 | 3.20 | 0.48 | 24.00 |
| 1W(2WS) | 11.00 | 4.50 | 0.68 | 29.00 |
| 2W(3WS) | 15.00 | 5.00 | 0.68 | 30.00 |
| 3W(5WS) | 17.00 | 6.00 | 0.68 | 30.00 |
Construction:
| No. | Components | ||
| A | Ceramic core | ||
| B | Metal Film | ||
| C | Caps | ||
| D | Epoxy resin painting | ||
| E | Color code | ||
| F | Soldered or tinned annealed wire. | ||
FAQ Of Topmay Capacitor
1) Can I have a free sample to test ?
Yes, we could provide free samples to test and check quality. Freight cost is collected.
2) What is the lead time?
Sample needs about 7~10 working days prepared; mass production average time takes 15-20 working days
3) Do you have any MOQ limit?
Yes. But it depends on product. Normally MOQ is 2K~10Kpcs
4) How about price terms?
We do FOBSHENZHEN if order amount is more than 5000USD. Less than that, it is EXWSHENZHEN and we do not undertake local charge.
5) What information should I let you know if I want to get a quotation?
Basically for capacitor, it requires to know detailed capacitance and voltage. If you have more information, such as type, product photo for reference, you could kindly provide too.
Our series of strong products of capacitors can be divided into below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65, CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in , Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
And series of resistors which we develop new production lines are as below:
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.