Thin 0.15mm Molybdenum Strip 10.2g/Cm3 Density Wear Resistance
Assorted Of Molybdenum Strip For Molybdenum Products Massive Available
Description:
The company has more than 15 sets of rolling machines with different specifications, which can provide customers with various square, round,or strip tungsten-molybdenum foil, sheet, and plate, and can vacuum anneal the molybdenum strip. Our molybdenum strips and other rolled products have excellent physical properties and are widely used in the vacuum furnace industry to make tungsten-molybdenum heat insulation screens, tungsten-molybdenum heat generators, furnace support frames and containers,the coating industry to make tungsten boats, molybdenum boats and cathodes, and the electronics industry to make tungsten targets, molybdenum targets and various tungsten-molybdenum deep processing products.
Specification:
The thickness of our molybdenum strip can be as thin as 0.15mm.The purity of our molybdenum strip can reach 99.95%, and the density can reach or close to the theoretical density.The quality of our molybdenum strip complies with the American standard ASTM-B760-2007.
Molybdenum tape is packed in wooden boxes, which are wrapped with moisture-proof paper and filled with foam between the goods and the box. At the same time, desiccant is placed to prevent moisture.
Molybdenum plate application
1. Suitable for producing ion implantation parts
2. For producing electric light source parts, components of electric vacuum and electric power semiconductor
3. For producing Mo-boats, heat shield and heat bodies in high temperature furnace Dimension:(0.05-50mm thickness)*W(10-600)*L(L≤2000mm) We aslo provide goods per clients'drawing or requeirements.
Specifications of rolled molybdenum plates:
| Thickness mm | Width mm | Length mm |
| 0.10 ~ 0.15 | 300 | 1000 |
| 0.15 ~ 0.20 | 400 | 1500 |
| 0.20 ~ 0.30 | 650 | 2540 |
| 0.30 ~ 0.50 | 750 | 3000 |
| 0.50 ~ 1.0 | 750 | 5000 |
| 1.0 ~ 2.0 | 600 | 5000 |
| 2.0 ~ 3.0 | 600 | 3000 |
| > 3.0 | 600 | L |
Molybdenum ASTM B387
| TABLE1 Chemical Requirements | ||||||
| Element | Composition,% | |||||
| Material Number | ||||||
| 360 | 361 | 363 | 364 | 365 | 366 | |
| C | 0.030max | 0.010max | 0.010-0.030 | 0.010-0.040 | 0.010max | 0.030max |
| O,MAXA | 0.0015 | 0.0070 | 0.0030 | 0.030 | 0.0015 | 0.0025 |
| N,MAXA | 0.002 | 0.002 | 0.002 | 0.002 | 0.002 | 0.002 |
| Fe,MAX | 0.010 | 0.010 | 0.010 | 0.010 | 0.010 | 0.010 |
| Ni,MAX | 0.002 | 0.005 | 0.002 | 0.005 | 0.002 | 0.002 |
| Si,MAX | 0.010 | 0.010 | 0.010 | 0.005 | 0.010 | 0.010 |
| Ti | ... | ... | 0.40-0.55 | 0.40-0.55 | ... | ... |
| W | ... | ... | ... | ... | ... | 27-33 |
| Zr | ... | ... | 0.06-0.12 | 0.06-0.12 | ... | ... |
| Mo | balance | balance | balance | balance | balance | balance |
A Pending approved methods of analysis,deviations these limits alone sahll not be cause for rejection.
| TABLE2 Permissible Variations in Check Analysis | |||
| Material NO. | Check Analysis Limits,max or range,% | Permissible Variations in Check Analysis,% | |
| C |
360, 363, 364, 366, 361, 365
|
0.010–0.040
0.010
|
±0.005
±0.002
|
| OA |
361
360, 363, 365, 366
364
|
0.0070
0.0030
0.030
|
+10 % relative
+10 % relative
+10 % relative
|
| NA |
361, 364, 365
360, 363, 366
|
0.0020
0.0010
|
+0.0005
+0.0005
|
| Fe |
360, 361, 363, 364, 365, 366
|
0.010
|
+0.001
|
| Ni |
360, 361, 363, 364, 365, 366
|
0.005
|
+0.0005
|
| Si |
360, 361, 363, 364, 365, 366
|
0.010 |
+0.002
|
| Ti |
363, 364
|
0.40–0.55
|
± 0.05 |
| W | 366 |
27.0–33.0
|
±1.0 |
| Zr | 363,364 |
0.06–0.12
|
±0.02 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.