Custom Made Tungsten Alloy Balls 1" 1.5" 2" Polished Tungsten Sphere
Product description
The raw materials are made from high purity powders with low impurity content, high sintering density and high deformation of the forged products. The processing process focuses on the control of the forging process, supplemented by the HIP process if necessary, to ensure high density, fine grain and easy deep processing. High-density, fine-grained tungsten-molybdenum forgings have become a key feature of Acme's products.
Depending on the process, the density of tungsten rods is 18.5g/cm³, in the conventional process and 19.0/cm³ or more in the HIP process.
Product specifications
| Content | Size(mm) |
| Tungsten wire | Ф0.1~Ф3.0 |
| Tungsten rod/bar | Ф2~Ф200 |
| Tungsten block/cube | Single weight up to 100kg |
Chemical composition of tungsten plates
| Grades | W | Impurity content Not greater than | |||||||||
|
Al |
Ca | Fe | Mg | Mo | Ni | Si | C | N | O | ||
| W1 | Remainder | 0.002 | 0.005 | 0.005 | 0.003 | 0.01 | 0.003 | 0.005 | 0.008 | 0.003 |
0.005 |
Product detail
Packaging and shipping details:
Inspection
Every tungsten and molybdenum product is under strict nondestructive test and density detection. We offer material composition sheet and examination report of the products.
Packing:
First, packaging with moisture-proof paper
Second, packaging with kraft paper
Third, packaging with foam plastics in all side of plywood case.
Finally packing products in plywood case
Shipping:
We will ship the goods by DHL, Fedex, UPS, TNT, EMS etc. or as requires
it usually costs 4-7 days by air transportation
if you don't receive it in short time, please contact us freely.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.