ASTM 1050 1060 Aluminium Round Tube Welded Seamless Aluminum Square Pipe

Aluminium Alloy Square Tube ASTM 1050 1060 Aluminium Round Tube

1050 Aluminum Tube Parameters:

1050 Aluminum Tube Chemical Composition (%):

1050 Aluminum Tube Applications:

1050 aluminum tube has high ductility and a highly reflective finish. Besides, 1050 aluminum tube is non-heat treatment series is produced in extruded sections. It has excellent cold workability, braze-ability, and solder-ability, and it is strengthened by cold working. However, 1050 aluminum tube has low mechanical strength compared to more significantly alloyed metals. All of these characteristics make 1050 aluminum tube well suited to chemical and electrolytic brightening but not in casting. Last but not least, moderate strength and good anodizing quality enable our products to have a vast application. Popular application: roofing, gutter, ps panel, etc

1050 Aluminum Tube Show:

1050 Aluminum Tube Informations:

1-A: 1050 aluminum tube introduction

1050 pure aluminum tube belongs to 1000 series aluminum tube, which is the commercially pure wrought family with a purity of 99.5% Al. It also belongs to the 1000 series aluminum alloy, which has better correction resistance than other alloy series. In the 1050 aluminum tube, in addition to the component Al, 0.4% Fe is added, so 1050 aluminum alloy also has high conductivity. In general, 1050 aluminum tube properties exhibit high plasticity, strong corrosion-resistance, and excellent electrical and thermal conductivity, but the strength of 1050 aluminum alloy is low.

1-B: 1050 aluminum tube features

It has the characteristics of high plasticity, corrosion resistance, electrical conductivity and thermal conductivity. Since 1050 aluminum alloy has a higher thermal conductivity than other alloys. It has low mechanical strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat treatment. The production process is relatively simple and the price is relatively cheap. It is the most commonly used series in the conventional industry.

I-C: 1050 aluminum tube processing technology

Heat treatment process: oil quenching and tempering. The strength of this kind of wire is not as good as that of a lead bath, but the performance is uniform and the cost is lower. After cold coil forming, stress relief is carried out. Pull to specified size, and then annealing. After softening, the mechanical properties can be obtained only after quenching and tempering at medium temperature.