SGS 5005 Aluminium Strip 50mm X 2mm For Led Radiator Cookware

2mm Thick 5005 Alloy Aluminum Strip For Led Radiator Cookware

What is 5005 Aluminum Strip?

5005 aluminium strip belongs to 5-series Al-Mg alloy, it has good corrosion resistance and good weldability. This aluminum grade is the weakest alloy of the non-heat treatable aluminums. However, it can be hardened by cold working. Among them, the performance of 5005 aluminium alloy is similar to that of 3 series 3003 aluminium alloy, with moderate strength, good fusion, processing and formability, but its corrosion resistance and anodizing oxidation effect is better than that of 3003 aluminium alloy, the oxide film is brighter, and can achieve the same color as that of 6063 alloy. Therefore, 5005 aluminum strip is often used in the marine, automotive, aerospace, appliance, and architecture industries.

Chemical Composition of 5005 Aluminium Strip (%):

Features of 5005 Aluminum Strip:

1. Medium Intensity: Similarly, 5005 aluminum strip is a non-heat-treated alloy that is cold-machined to improve its strength.

2. Good Formability: Under the condition of hardening or annealing in semi-cold working, the plasticity of 5005 aluminum alloy is good, but in cold working, the strength increases, and the plasticity is low.

3. Excellent Weather Resistance: The strength of the 5005 aluminum strip, whose surface is treated by anodizing oxidation, will not decrease with the decline of temperature. No low-temperature brittleness occurs.

4. Physical Properties: 5005 aluminum tensile strength σb(MPa) is 100~205, elongation δ110 (%) is 1~8.

Applications of 5005 Aluminium Strip:

Informations of 5005 Aluminum Strip:

1-1: What is a 5005 aluminum strip?

Aluminum alloy 5005 is a medium strength alloy with very good resistance to atmospheric corrosion and very good weldability that is highly suitable for decorative anodizing.

1-2: Why is 5005 aluminum strip so common in the automotive industry?

You will see this grade in auto body paneling, fuel tanks, piping, and steering plates. It is so popular in the automotive industry because of excellent corrosion resistance and surface finish and, compared to other aluminum alloys, it has relatively high welded strength. These qualities make this aluminum grade suitable for autos, either for use in welded parts or paneling.

1-3: Can 5005 aluminum be cold worked?

Yes, though this grade is non-heat treatable, it is suitable for cold work hardening.

1-4: What is the density of 5005 aluminium?

The density of the aluminum strip is 2.7×10³kg/m³ (2.7g/cm³), while other metals are added to the 5005 aluminum strip, and there is about 0.05% of the other metal content, and the density is about 2.72×10³kg/m³ (2.72g/cm³).